Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARN45105-L-TV | 45 | 105 | – | – | 103 | 74.5 | 25 |
| 90 | 70 | 88 | 17.5 | 38.5 | 14 | 0.3 | 0.6 |
|
| 91 | 68 | 154,000 | 405,000 | 40,000 | 82,000 | 3,300 | 1,150 | 3.5 | 4,000 | 2,100 | 28.1 | 1 | 3.42 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
Ckj5-400 400A Vertical 1140V AC Medium Voltage Vacuum Contactor
>>
Aluminum Antique Hanging Picture Frames Photo Frames with Color Anodizing
>>
Hot Sale Aluminium Foil Wrapping Paper
>>
Taijia TEM-620XH Reinforced Concrete Bar Scanner Concrete Rebar Detector Covermeter rebar scanner
>>
Push Down Pop Up Stainless Steel Waste Sink Basin Drain
>>
Wheel Remote Lawn Mower Remote Wheel Type Grass Cutting Machine Home Use Remote Control Lawn Mowermachine Automated Lawn Mower
>>
Automatic liquid water bottle drinking pure mineral water filling machine equipment plant
>>
Japan Korea High Quality Quanzhou Tianjiao Factory Price OEM ODM Customized Big Absorbency All Size Adult Geriatric Diapers Pull up Pant
>>
Customs High Quality Breathable Anti Static Lustrous Surface Weight 225GSM Acetate Polyester Satin Silky Fabric for Woman Girl Ladies Dress Skirt Pants.
>>
Enterprise Network Router Netengine 8000 M8 Integrated Chassis Components
>>
MAICTOP car parts front sliver chromed grille for hilux revo rocco grill 2018-2020
>>
Hot sale spark 13020-d1010 Automotive Camshaft
>>
High Quality ASTM Universal Testing Machine for Textile
>>
520mm Swing Precision Slant Bed CNC Lathe Machine Ds28-O
>>
Second Hand Concrete Pump Truck Concrete Transfer Pumping Truck 2022 62m Used Concrete Pump Truck
>>
Hot Selling High Precision Piston Liquid Filling Automatic Tomato Sauce Filling Machine
>>
Ground Rail Large Format 6000W-30000W High Power Laser Cutting Machine on Factory Price with Max Raycus Laser Source
>>
handmade material toy creative bamboo stick
>>
Wholesale Original Replica 2024 2025 24/25 Thai Thailand Player Fans Version Retro Vintage Brazil National Ronaldo De Long Sleeve Football Set Soccer Jersey
>>
Small Type Gantry Milling Machine 2010t Worktable 3000X1000
