Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARN1545-L-TV | 15 | 45 | – | – | 53 | 41 | 16 |
| 35 | 24 | 34 | 7.5 | 20.5 | 11 | 0.3 | 0.6 |
|
| 36 | 22 | 24,900 | 53,000 | 13,000 | 17,500 | 8,500 | 2,200 | 0.35 | 1,400 | 110 | 0.274 | 1 | 0.37 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
World Best Selling Products 1600 Ton Hydraulic Press Equipment Price
>>
FT8210H Electromagnetic-Inductive Flow Sensor Electromagnetic Water Flow Sensor Electromagnetic Flow Meter Converter
>>
Custom Factory Fabrication Parts Stainless Steel Machining Part CNC Precision Parts
>>
18cm Battery Power Soccer Hoverball Air Hockey Electric Airlift Hover Ball Indoor Floating Hovering Light Outdoor Play Kid Gift Air Football Flying Airball Boy
>>
Automatic Liquid Filling Packing Machine Paste Sachet Packing Machine
>>
2025 Factory Directly Made Customized All Kinds of Plastic Mold Base/Die-Casting Mold Base/Large Automobile Mold Base
>>
92% Energy-Efficient 230V to 400V Voltage Transformation Device 15kw 20kw Power Converter
>>
Custom Round 1.75 Liter L Porcelain Storage Bottle
>>
Factory Supply Drive V-Belts 6pk2020
>>
New arrival CE standard high quality Extruder plastic gravimetric double color volumetric doser machine
>>
Siemens CNC Automatic Metal Surface Polishing Machine for Pharmaceutical Industry
>>
Ty700 1000m/1500m/2000m Horizontal Turning Lathe High Performance Flat Bed CNC Lathe
>>
Plastic Pulverizer Machine for PVC/LDPE/PP/HDPE
>>
F10 F18 F02 F07 N52 Transmission bracket For BMW 740Li 535i Transmission bracket 22326775916
>>
Brand New Auto Car Alternator 21481 21486 Sg9b057/Sg8b026 03D-903-025j/03D-903-025h for Volkswagen
>>
Dense Phase Pneumatic Conveyor System for Cement Particulate Positive Low Speed System
>>
Gold Edge Wire Ruffled Sheer Korean Wholesale Organza Ribbon Wide for Flower Wrapping
>>
T3 Series In Line Ultrasonic Water Measurement LCD Display Industrial Water Meter
>>
H Type a Type Meat Mesh Galvanized Layer Egg Hens Chicken Cage
>>
Best Selling Zero Gravity Hot Roller Hair SPA 4D Massage Chair Ms131 Plus
