Product Details
Product Description
Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
Basic functions Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card, extended temperature range, high-performance firewall/VPN: up to 124 Mbps/40 Mbps Supported browsers HTTPS support required Processor 330 MHz Status and diagnostic indicators Link/activity per port Security functions Dynamic Host Configuration Protocol (DHCP) support Server or Relay Agent Network Time Protocol (NTP) client Client Link Layer Discovery Protocol (LLDP) As per protocol 802.2 Remote Syslog Logging On externals server Virtual private network (VPN) throughput max. 42 Mbps (Router) max. 27 Mbps (Stealth mode, VPN bidirectional throughput) Number of VPN tunnels 10 (up to 250 tunnels with additional license as an option) Encryption methods DES, 3DES, AES-128, -192, -256 Internet Protocol Security (IPsec) mode ESP tunnel / ESP transport Authentication X.509v3 certificates with RSA or PSK Data integrity MD5, SHA-1, SHA 256, SHA-512 1:1 Network Address Translation (NAT) in the VPN Supported Firewall data throughput max. 130 Mbps (Router mode, default firewall rules, bidirectional throughput) max. 61 Mbps (Stealth mode, default firewall rules, bidirectional throughput) Firewall rules Configurable stateful inspection firewall with full scope of functions Filtering MAC and IP addresses, ports, protocols Protection against IP spoofing, DoS and Syn Flood Protection Routing Standard routing, NAT, 1:1-NAT, port forwarding
for instant use in the office or when traveling.
The FL MGUARD SMART2 is a further development of the FL MGUARD SMART.
Figure 1-2 FL MGUARD SMART2
FL MGUARD PCI4000 The FL MGUARD PCI4000 has the design of a PCI-compatible plug-in board.
The FL MGUARD PCI4000 is suitable for distributed protection of industrial and panel PCs,
individual machines, or industrial robots. It has a configuration memory in the form of a
replaceable SD card, which can be easily accessed on the front.
Figure 1-3 FL MGUARD PCI4000
FL MGUARD DELTA TX/TX The FL MGUARD DELTA TX/TX is ideal for use in desktop applications, in distribution
compartments, and other environments close to production process with low requirements
for industrial hardening.
Individual devices or network segments can be safely networked and comprehensively
protected. The FL MGUARD DELTA TX/TX can be used as a firewall between office and
production networks as well as a security router for small and medium-sized workgroups.
Figure 1-4 FL MGUARD DELTA TX/Green ON Power supply 1 is active
P2 Green ON Power supply 2 is active (FL MGUARD RS2000: not used)
STAT Green Flashing Heartbeat. The device is correctly connected and operating.
ERR Red Flashing System error. Restart the device.
– Press the Rescue button (for 1.5 seconds).
– Alternatively, briefly disconnect the device power supply and then connect it
again.
If the error is still present, start the recovery procedure (see Page 324) or contact your
dealer.
STAT+ ERR Flashing
alternately: green
and red
Boot process. When the device has just been connected to the power supply. After
a few seconds, this LED changes to the heartbeat state.
SIG – (Not used)
FAULT Red ON The alarm output is open due to an error (see “Installing the FL
MGUARD RS4000/RS2000” on page 20).
(The alarm output is interrupted during a restart.)
MOD Green ON Connection via modem established
INFO Green ON The configured VPN connection has been established.
Flashing The configured VPN connection is being established or aborted.
LAN Green ON The LAN/WAN LEDs are located in the LAN/WAN sockets (10/100 and duplex LED)
Ethernet status. Indicates the status of the LAN or WAN port. As soon as the device
is connected to the relevant network, a continuous light indicates that there is a
connection to the network partner in the LAN or WAN. When data packets are
transmitted, the LED goes out briefly
>>
TCA Integrated 3 Tiers 120 Birds Chicken Egg Poultry Farming Equipment Animal Husbandry Equipment
>>
Factory sell Commercial Philippine Snack Sweet Pizza Cone Oven Display Shelf Pizza Cone Machine
>>
China Automatic Vertical Flat Insulating Glass Production Line Factory
>>
USB Rechargeable Hair Removal for Trimmer Electric Dog Clipper
>>
Ready Mixed Concrete Batching Plant in Canada Mobile Portable Concrete Mixing Plant for Road Bridge Building Construction
>>
CNC Turning and Milling Center Slant Bed CNC Turret Lathe with High Quality
>>
JOHNCOO Diy Aviation Aluminum Brand Modified Line Cup Fishing Reel Metal Wire Cup
>>
Screw Cold Forming Machine/M5/One Die Two Blow/1d2b
>>
Hospital Medical Instrument Back Table Cover
>>
Customizable Blowing Mould for Water Bottles Stainless Steel Material
>>
YFMC-720A Manual Roll to Roll Lamination Machine
>>
Glass Computer Display Screen Desktop Table Water Dispenser
>>
Bisen Brand Encoder Limit Switch Remote, Gate Openermotor
>>
2022 Medical Co2 Fractional Laser 60w Skin Rejuvenation Vaginal Tightening Laser Acne Scar Removal Co2 Laser Machine
>>
18PCS 18X10W 4in1 RGBW Wash LED PAR Light for DJ KTV Bar Disco Nightclubs
>>
Railway Station Decorative Waterproof Wavy Aluminum Linear Strip Ceiling Manufacturing
>>
54* 3W LED PAR Light Disco DJ LED Stage Lighting
>>
MAICTOP car exterior accessories front grille for Hilux revo rocco black front grille 2021
>>
High Speed Advertising 3D Carving Milling Cutting Industrial CNC Router Woodworking Engraving Machine
>>
Waste Plastic Washing Recycling Machine for Bottle Recycling From China
