| US$400,000.00-500,000.00 | 1 Set (MOQ) |
| 1 | Effective width | 2000mm | 2 | Design produce speed | 250m/min | |||
| 3 | 3 ply Economic speed | 0-220m/min | 4 | 5 ply Economic speed | 0-180m/min | |||
| 5 | Longitudinal separation accuracy | ±1mm | 6 | Cross-cutting precision | ±1mm | |||
note | Speed the above targets required to achieve:effective width 2000mm,Comply with the following standards and ensure the paper's equipment condition 175 ºC heating surface temperature. | |||||||
| Top paper index | 100g/m2--180g/m2 Ring crush index(N.m/g)≥8 (Water containing8-10%) | |||||||
| Core paper index | 80g/m2--160g/m2 Ring crush index(N.m/g)≥5.5 (Water containing8-10%) | |||||||
| In paper index | 90g/--160g/ Ring crush index(N.m/g)≥6 (Water containing8-10%) | |||||||
| 9 | Flute combination | customized | ||||||
| 10 | Steam requirement | The maximum pressure 16kg/cm2 | Common pressure10-12kg/cm2 | use4000kg/Hr | ||||
| 11 | Electricity demand | AC380V 50Hz 3PH | Total power≈150KW | Running Power≈120KW | ||||
| 12 | Compressed air | The maximum pressure 9kg/cm2 | Common pressure4-8kg/cm2 | use1m3/min | ||||
| 13 | Space | ≈Lmin70m*Wmin10m*Hmin5m(The actual drawing to provider to provide audited prevail) | ||||||
| 1,Steam heating system:proposal with 4000Kg / Hr of a steam boiler. Pressure:1.25Mpa steam pipeline. 2,Air compressed machine,air pipeline,glue conveying pipe. 3,Power supply,wires connected to the operation panel and line pipe. 4,Water sources,water pipelines,buckets and so on. 5,Water, electricity, gas flush mounting civil foundation. 6,Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material. 7,Oil equipment,lubricating oil,hydraulic oil,lubricating grease. 8,Installation,commissioning of food, accommodation. And provide installers with the installation. |
| No. | Name | Qty | Feature |
| 1 | Hydraulic Mill Roll Stand | 5 | --Max support paper diameter:1500mm --Up-down lift, left-right move controlled by hydraulic --Expansion clamp, multi-point brake by --pneumatic control --with trolley and track |
| 2 | Pre-heater | 4 | --The roller φ900 mm,Electric adjustment angle,adjusting heating area within the range of 270 ° |
| 3 | Single Facer | 2 | --Corrugated rollerφ360mm, 48CrMo high quality alloy steel, --Independent gearbox,universal joint drive structure --Corrugated roller independent small wall board design, convenient disassembly and change corrugated easier |
| 4 | Conveying Bridge | 1 | --The main beam is connected with the GB 200 channel steel, 150H steel, 63 angle steel --Suction tension and electric correcting |
| 5 | 3 layers Pre-heater | 1 | --The rollerφ900 mm,electric adjustment angle angle,adjusting heating area within the range of 270 ° |
| 6 | Glue Machine | 1 | --Glue roller φ269mm,carved 25 line pit type mesh --With preheater device --Independent frequency motor drive --Circulating supply glue with PLC control --Man-machine interface display |
| 7 | DF-80 Double Facer | 1 | --Main frame is 400 mm GB channel steel --Hot plate 600 mm 18 pcs --4 M cooling section --Adopt pressure shoes lifting by plc control --The upper and lower belt correct automatically --Temperature display --Main drive Frequency motor drive --Good quality high speed cotton woven belt |
| 8 | computer Thin Blade Machine | 1 | --Two rows of scorers,realizes minimum scorer spacing is 0mm. --Slitter and scorer independent moto control ,realize fast change. Change order within 1-2s.precise(±0.5mm) --Famous brand in the world electric elements.Application of two machine together can also realize non-stop order change. --Speed synchronizes with board speed.Standard communication interface,easy to link with management system. |
| 9 | NC cut off | 1 | -Double layer design,Helical knife, computer control,operate by touch screen -KEB servo driver from Germany --Energy storage type braking --Oil-immersed gear transmission --10.4-inch touch screen display |
| 10 | Automatic stacker | 1 | - with horizontal output -2 delivery parts, convey sheet smooth and tidy -Automatic counting |
| 11 | Glue Making System | 1 | --Customers supply the pipeline --The glue making device includes: carrier tank,main body tank,storage tank,glue feeding pump and returning pump |
| 12 | Internal Steam System | 1 | --Steam system components adopt GB valva: Contains rotary joint,up and down distributor ,drain valve and pressure gauge, etc --Boiler and pipeline supply by customer |
| 1 | Automatic splicer | 5 | -Applicable maximum base paper diameter: 1500mm -With the automatic tension control of the original paper frame -Paperless tail connection to reduce the loss of raw paper -PLC touch screen control |
| 2 | cassette single facer | 1 | --Corrugated main roller ¢360mm, --15 minutes quick replacement tile roll,energy efficient synchronous belt rotation,with maintenance-free airbag pressure --Independent glue unit,PLC automatic control glue --HMI touch screen,vacuum with silence device |
| 3 | Automatic tension and deviation correction machine | 1 | - it has automatic matching, opposite side function selection, convenient for the production of paper; - all the replacement width does not need personnel to send paper over the bridge, reduce labor, do not need to slow down shutdown, improve production efficiency; - The accuracy of light screen in the opposite is ± 1mm; |
| 4 | Automatic Glue Making System | 1 | -Mixing system -Electrical / Software control system -Auto powder chemical addition system -Auto liquid caustic soda addition system -Auto liquid chemical addition units -Auto starch glue delivery system Starch storage system |
| 5 | Auto production management system | 1 | --Production order scheduling management (insert. revise. Delete) can be divided into two levels of permission management, to prevent illegal operations. --Completed data query (length. area. Undefect rate etc.) --Order remarks query (paper information Chinese remarks) --Automatic order change and alarm function |
