Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARN1747-L-TV | 17 | 47 | – | – | 57 | 43.5 | 16 |
| 38 | 28 | 38 | 9 | 23 | 11 | 0.3 | 0.6 |
|
| 39 | 26 | 26,000 | 57,000 | 14,000 | 19,900 | 7,800 | 2,100 | 0.4 | 1,600 | 160 | 0.464 | 1 | 0.41 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
Professional Manufacturer Decanter Centrifuge for Ddgs Separation
>>
UGS3004 4 Color Automatic Roll to Roll Label Screen Printing Machine
>>
High Speed CNC Wire Cutting Machine with Taper Angle Dk7763
>>
Adjustable Small Block Chevy V8 Aluminum Short Water Pump Natural
>>
Top Quality Reasonable Price Supermarket Double Side Gondola Shelf
>>
Stainless Steel Tactile Blind Nail Indicator Road Nail Stud
>>
Various Vacuum Systems Available Continuous Automatic Vacuum Deaerator
>>
9730110040 Quick Relay Valve for Brake Applications 9730110040 9730110042 9730110047 9730110027 Be Used for Mercedes-Ben Zmeritor Nooteboom Irisbus Kenworth
>>
1000ml Vacuum Filter Pes Disposable for Lab Use Filters 0.22 Micron
>>
Factory direct sell Adjustable double pole Rod stiness steel Garment Rack Rolling Clothes Organizer
>>
3-6mm Fence Panel Wire Mesh Welded Welding Machine 3D Fence Panel Making Wire Mesh Welding Machine
>>
10 T Shipping Container Loading Ramp Hydraulic Mobile Dock Leveler
>>
Wireless Ring Video Smart WiFi Bell with Camera Intercom Wireless Doorbell
>>
Temperature Probes, Esophageal/Rectal, Disposable
>>
FTTH Self-Supporting Figure 8 Drop Fiber Optic Cable Gjyxch, 1/2/4core GJYXFCH
>>
2D Cheaper Kids Toy PVC or TPU Inflatable Mini Punching Bag
>>
Carry on Garment Bag Large Travel Bag Suit Bag with Shoe Pouch
>>
Aluminum Profile CNC Corner Code Cutting Saw High-Efficiency Intelligent Aluminum Door and Window Machine
>>
Reliable Zoomlion Hydraulic Scissor Lift for Safe Elevation Tasks
>>
New Design Copper Security Steel Door for government Entrance Door
