| US$47.00 | 1 Piece (MOQ) |
| Model No. | MT6450 | ||
| Basic function | Range | Resolution | Accuracy |
| DC Voltage | 400mV | 0.1mV | ±(0.8%+2d) |
| 4V | 1mV | ||
| 40V | 10mV | ||
| 400V | 100mV | ||
| 1000V | 1V | ±(1%+3d) | |
| AC Voltage | 400mV | 0.1mV | ±(1.2%+5d) |
| 4V | 1mV | ||
| 40V | 10mV | ||
| 400V | 100mV | ||
| 700V | 1V | ±(1.5%+5d) | |
| DC Current | 40A | 10mA | ±(2%+10d) |
| 400A | 100mA | ±(2%+5d) | |
| 1000A | 1A | ||
| AC Current | 40A | 10mA | ±(2%+10d) |
| 400A | 100mA | ±(2%+5d) | |
| 600A | 1A | ||
| Resistance Ω | 400Ω | 0.1Ω | ±(1%+5d) |
| 4KΩ | 1Ω | ||
| 40KΩ | 10Ω | ||
| 400KΩ | 100Ω | ||
| 4MΩ | 1KΩ | ||
| 40MΩ | 10KΩ | ±(1.5%+5d) | |
| Capacitance | 10nF | 0.001nF | ±(3%+5d) |
| 100nF | 0.01nF | ||
| 1uF | 0.1nF | ||
| 10uF | 1nF | ||
| 100uF | 10nF | ||
| 1000uF | 100nF | ||
| 10mF | 1uF | ±(5%+5d) | |
| Frequency | 10HZ | 0.001HZ | ±(0.5%+3d) |
| 100HZ | 0.01HZ | ||
| 1KHZ | 0.1HZ | ||
| 10KHZ | 1HZ | ||
| 100KHZ | 10HZ | ||
| 1MHZ | 100HZ | ||
| 10MHZ | 1KHZ | ||
| Duty cycle | 1%~99% | 0.001 | |
| Temperature | -50-300ºC | 1ºC | ±(1%+4d) |
| 301-1000ºC | 1ºC | ±(1.9%+5d) | |
| -58-600°F | 1°F | ±(1.2%+6) | |
| 601-1832°F | 1°F | ±(1.9%+6) | |
| Input impedance | About 10MΩ | ||
| Auto range | Support | ||
| Manual range | Support | ||
| True RMS | Support | ||
| Input protection | Support | ||
| Auto power-off | About 10 minutes | ||
| Diode test | It can measure the LED working voltage below 3V | ||
| Duty cycle measurement | Support | ||
| Voltage frequency measurement | Support | ||
| NCV (charged) measurement | Support | ||
| On-off (buzzer gear) | Support | ||
| Low voltage indicator | Support | ||
| Data hold | Support | ||
| Jaw size | 52mm/2.05in | ||
| Surge signal measurement | Support | ||
| Power supply | 1x6F22 9V dry battery | ||
