ZARN4090-TV 40*90*75mm Needle roller/axial cylindrical roller bearings

Product Details

Product Description

Product Description

Designation	Dimensions																		Mounting dimensions		Basic load ratings				Limiting speeds		Bearing frictional torque MRL Nm	Rigidity axial caL N/µm	Tilting rigidity ckL Nm/ mrad	Mass moment of inertia3) Mm kg · cm2	Axial runout6) µm	Mass m =kg
																					axial		radial
																			Da max.	da min.	dyn.Ca	stat. C0a	dyn.Cr	stat. C0r	nG oil	nG grease
	d	D	H	H1	H2	H3	C	C1	D1	D2	D3	B	B1	B2	r min.	r1 min.	d1	J			N	N	N	N	min–1	min–1
ZARN4090-TV	40	90	75	50	–	–	25		78	–	–	16	–	–	0.3	0.6			79	65	117,000	315,000	38,000	74,000	3,700	1,200	2.5	3,800	1,800	13.3	1	2.09
ZARN4090-L-TV	40	90	–	–	93	68	25		78	60	78	16	34	12	0.3	0.6			79	58	117,000	315,000	38,000	74,000	3,700	1,200	2.5	3,800	1,800	15.5	1	2.39

Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs

---

>> Factory Direct Supply Fast Cooling And Heating R410a 8000BTU Portable AC And Heater
>> Dk77 Series Multi CNC Wire Cutting Wire Cut EDM Machine
>> Professional Factory Hot And Cold Air Conditioner 30000 Btu
>> Simple American Creative Lighting Modern Decorative Crystal Chandelier LED Pendant Light
>> ZF390C Automatic Wallet Envelope Making Machine equipment
>> Steam Jacketed Stainless Steel Liquid Soap Mixing Tank
>> 3MM 4ftx8ft Ivory/Grey/White/Transparent/Black Plastic PVC Sheet Price
>> Home Use Small Excavator Digger Mini Excavator for Sale
>> Beard Grooming Kit Safety Shaving Razor Mens Shaving Kit
>> Plastic Recycling Line of PP PE HDPE LDPE LLDPE Film Compactor Force Feeder Pelletizing Equipment Plant
>> Manufacturer OFC/CCA 4 Gage Audio AMP Wiring Kit 8AWG Car Subwoofer Amplifier Cable Wiring Kit
>> R290 Monoblock DC Inverter Air to Water Heat Pump Heating Cooling Dhw with WiFi Smart Control Sg Ready High Cop ERP a+++ Intelligent Defrost Low Gwp
>> Hard Oblong Violin Case Green (SVC306) High Grade Embroidery Chinese Style China
>> 4 Cavities Semiautomatic Blow Moulding Machine/Blow Moulding Machine/Plastic Injection Molding Machine/SGS Pet Preform Machine /Water Machine with CE
>> 180L 160L 140L 120L Small Portable Concrete Mixers Electric Cement Feed Mixer
>> Fully Automatic Slitting Machine 1600 Adhesive Warning for Adhesive Tape
>> European style aluminum glass louvers window shutter price of glass louver
>> Wholesale Designer Man Clothing High Quality Patch Ripped Denim Trousers Slim Fit Jeans Pants for Men
>> Complete Chicken Slaughterhouse Processing Line - 500-10000bph Capacity
>> sponge drain holder Sink Caddy Sponge Holder, Hanging Dish Sponge Organizer Holder, Over Sink Expandable Brush Soap Storage Rack