| US$37,000.00 | 1 SET (MOQ) |
| SPECIFICATION | LTY3200 | ||||
| A | B | C | D | ||
| INJECTION UNIT | |||||
| SCREW DIAMETER | mm | 67 | 70 | 75 | |
| SCREW L/D RATIO | L/D | 23 | 22 | 20.5 | |
| SHOT VOLUME(THEORETICAL) | cm3 | 1181 | 1289 | 1480 | |
| INJECTION WEIGHT(PS) | g | 1076 | 1175 | 1349 | |
| INJECTION RATE | g/s | 337 | 368 | 422 | |
| INJECTION PRESSURE | MPa | 186 | 170 | 148 | |
| SCREW SPEED | rpm | 190 | |||
| CLAMPING UNIT | |||||
| CLAMP FORCE | KN | 3200 | |||
| OPEN STROKE | mm | 660 | |||
| SPACE BETWEEN TIE BARS(W*H) | mm | 680x680 | |||
| MAX.MOULD HEIGHT | mm | 720 | |||
| MIN.MOULD HEIGHT | mm | 250 | |||
| EJECTOR STROKE | mm | 160 | |||
| EJECTOR FORCE | KN | 70 | |||
| OTHER | |||||
| MAX.PUMP PRESSURE | MPa | 16 | |||
| PUMP MOTOR POWER | kW | 37 | |||
| HEATING POWER | kW | 24.7 | |||
| MACHINE DIMENSION(L*W*H) | m | 7.21x1.99x2.34 | |||
| OILTANK CUBAGE | L | 620 | |||
| MACHINE WEIGHT | t | 12.8 | |||
