Factory Supply Australia Standard 6m X2.4m Steel Reinforcing Concrete Welded Wire Mesh Construction Rebar Mesh Panel

Product Description

SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh
Reinforcing mesh was made by deformed bar after drawn,which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N,300E,500L,500N and 500E,the mesh spaces is 200mm,there is two sides overhang which is 100mm.

Clearly ribbed on the surface	Firmly weld spot
Accurately wire diameter	Mesh space messured
Uniform mesh spaces	Flat and smooth mesh surface

the steel bar after drawing shape as below figure:
1.The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45°and is less than 70°,the rib height is from 0.025d to 0.10d.
2. The reinforcing mesh panel includes transverse and longitudinal bar,pitch and overhang.The Australian and new zealand's market,the normal panel size is 2.4m*6m.Because of containers size,we always advise our cutomer to make the panel size to be 2.2m*5.8m.It can be easy to be load and save more USD1000 per container for packing and loading cost.
The skatch of reinforcing mesh as below:

NL= Number of longitudinal bars PL= pitch of longitudinal bars dL= diameter of longitudinal bars NC=Number of transverse bars	L= length of longitudinal bar B=Length of transverse bar u1=Overhang of longitudinal bars u2=Overhang of longitudinal bars

Common size of Squre reinforcing mesh panel for Austialian Market

Mesh Type and reference number	Longitudinal bars		Cross-bars		Mass for 6 x2.4 m sheets		Cross-sectional area/m width
	No.x dia., mm	Pitch@mm	No.x dia., mm	Pitch@mm	Unit area kg/sqm	Sheet, kg	Long'l bars sqmm/m	Cross bars sqmm/m
Squre,with edge side-lapping bars
SL102	10x9.5+ 4x6.75	200 100	30x9.5	200	5.6	80	354	354
SL92	10X8.6+ 4X6.0	200 100	30x8.6	200	4.6	66	290	290
SL82	10x7.6+ 4x6.0	200 100	30x7.6	200	3.6	52	227	227
SL72	10x6.75+ 4x5.0	200 100	30x6.75	200	2.8	41	179	179
SL62	10x6.0+ 4x5.0	200 100	30x6.0	200	2.2	33	141	141
Squre,without edge side-lapping bars
SL81	25X7.6	100	60x7.6	100	7.1	105	454	454

UTE Mesh Size

Product Code	Std Unit	Longitudinal Wires	Cross Wires	Mass(kg)	Dimensions(m)
SL62UTE	Sheet	8×6@200	20×6@200	18	4×2
SL72UTE	Sheet	8×6.75@200	20×6.75@200	23	4×2
SL82UTE	Sheet	8×7.6@200	20×7.6@200	30	4×2

Our products packing and shipment:

Steel pallet for reinforcing mesh size 2.4m *6m	Loading container for reinforcing mesh sheet:2.4m *6m

3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars,twin bars or combination of single bars and twin bars.

	Single bars
	Twin bars
	Combination of single bars and twin bars

4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels.
4.1.1
Table1
Composition of reinforcing steels

Type of analysis	Chemical composition,% max
	All grades			Carbon equivalent value(Ceq)for standard grades
	C	P	S	250N	500L	500N	300E	500E
Cast analysis	0.22	0.050	0.050	0.43	0.39	0.44	0.43	0.49
Products analysis	0.24	0.055	0.055	0.45	0.41	0.46	0.45	0.51

4.1.2
Table 2
Characteristic mechanical properties of reinforcing steels

Property	250N (Note1)	500L (Note1)	500N	300E (Seismic)	500E (Seismic)	Type of specified value
Yield Stress(Mpa) RekL RekU	≥250 ---------	≥500 ≤750	≥500 ≤650	≥300 ≤380	≥500 ≤600	CvL:p=0.95 CvU:p=0.05
Ratio Rm/Re	≥1.08 ---------	≥1.03 -----------	≥1.08 --------	≥1.15 ≤1.50	≥1.15 ≤1.40	CvL:p=0.90 CvU:p=0.10
Unitform Elogation Agt(%)	≥5.0	≥1.5	≥5.0	≥15.0	≥10.0	CvL:p=0.90

Notes: Grade 250N is supplied as plain round reinforcing steel complying with AS 3679.1,exceptthe tolerance of the diameter and roundness dosen't apply it. For 500L steel bars,only requriement for wire diameter is less than 5.0mm is RekL≥500
Material certificate of reinforcing mesh as below:
How can we conctrol our products quality for exporting Autralia?
Firstly,we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.
Secondly,the panel size tolerances meassure way as: Panel Size dimensions≤6m in length,there is 40mm tolerances. Panel size dimensions>6m in length,the tolerance is ±0.7% Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. Weigh the each bundle weight to calculate each panel weight.

---

>> Sublimation Blank Kid’ S School Bag
>> 304 316 Stainless Steel Luxury Thermos Vacuum Flask Coffee Pot Thermo Tea Pot 2L Coffee Pot Thermos Tea Coffee Pot for Dubai for Africa Arabic Tea Pot Thermos
>> Brass Hot Sell Single Handle Water Tap Basin Faucet Odn- 691 Series
>> Auto Platform Single Twin Mast Section Work Climber Platform
>> portable wooden cedar lining cigar cutter packaging bag travel humidor PU leather cigar case for for xiga
>> Parcel Boxes Parcel Delivery Box Anti-theft Wall Mounted Smart Outdoor for Mail and Parcel Outdoor drop box recessed
>> Automatic Pillow Swiss Roll Marshmallow Packing Machine for Food
>> Front Bumper for BMW 3 Series E92 1M Look body kit
>> GSK Cutting-Edge Plastic Injection Machine for Efficient Manufacturing Solutions
>> 2020 sublimation print soccer uniform
>> Electromagnetic Sheet Metal Automatic CNC Bending Machine
>> Stab Resistant Body Protector Riot Control Suit
>> Ladies Plus Size Bright Crystal Stiletto Heel Pointed Toe Slip on High Heels Teal Knee Boots for Women
>> Building Material PPGI Metal Roof Color Coated Galvanized Roofing Corrugated Steel Sheet
>> Wine red metal glass wood kitchen corner cabinet doors price basket
>> Haituo Fruit Crate Injection Molding Machine
>> BNC to SMA RG316 Cable, BNC Female to SMA Male with RG316 Cable
>> Factory High Strength Anti Slip Grid Fiberglass FRP GRP Molded Grating Walkway
>> China Factory Car Front Bumper For 2003-2008 Bracket For Lexus 52146-48010 52145-48010 For Toyota
>> Wholesale Price Fitness Adjustable Strength Training Ankle Weight Iron Sand Ankle Support