Green-Tec energy-saving furnace to carbonize coconut shell,wood log,sawdust

Product Description

Product Description
Product Description
Green-Tec energy-saving furnace to carbonize coconut shell,wood log,sawdust
This furnace to carbonize coconut shell is ideal equipment to for mass charcoal production. This type of smokeless carbonization
stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization.
60% of the redundant smoke can be used in drying and carbonization which saves energy and increases the enterprise revenue.
1.There have 4 of steel drums at the top of the machine body. Under each drum, it’s a small room to make fire.Carbonization furnace
is a stove used to change biomass briquette into charcoal biquette.
The quality and efficiency of kiln affect final forming of charcoal briquette greatly.
2.The 4 drum have lids on top, and in the middle of the lids, there also connect with 4 pipes, is used for gases to escape (gases
will come out when heating the drum). This pipe is called the "retort." Fill the retort with the chunks of hard wood and place the
lid on top.This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization. Due to its rational
structure, the furnace only needs small quality of heat consumption.
3.Place wood and start the fire at the bottom of the drums. Place the retort inside the drum, resting it on the fire.
4.Wait for the fire to get really hot
5.Keep an eye on the smoke. You should be burning for about three hours and the smoke should be……, which means that the water, tar
and other compounds in the hardwood chunks are being released. Keep the temperature up by occasionally adding wood to fire.
6.Watch for the smoke ……, which means the gases have been burned out. Pull the rods out to drop the retort into the burned wood and
ashes, stopping the flow of air to the charcoal inside.
7.Wait an hour, then lift the retort out of the drums. Wear welder's gloves, as the retort may not be cool enough to handle. Place
the retort in dirt and allow it to cool further.
8.After about two more hours, check to see if the retort is cool enough to touch. If so, remove the lid to check the results of
your burn. If successful, the hardwood chunks inside should have reduced by about a third, and been converted to lump charcoal.
1.One stove could match with 2-3 inner pot to enlarge the capacity 2-3 times.
2.For each inner pot, from the briquette into charcoal, it takes about 6-8hours.
3.After carbonizing the first circle,the inner pots will put out and cooled outside. Then putting another inner pots into the furnaces.
4.Only to ignite the first furnace, and the airflow produced by it will be enough to supply the next furnaces. During this process, no smoke is released, and the hot air can use recycled which is a good way to save time and energy.
5.And the furnaces are equipped with the lifting crane which can help you to put and discharge the inner pots and charcoals easily
Detailed Images
Certifications
Our Service
Pre-Sales Service
* Inquiry and consulting support. 
* Sample testing support. 
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the machine. 
* Engineers available to service machinery overseas.
Our Company

---

>> Intellingent Rock Board Stone Round Edge Polygon Machine
>> Multifunctional roll paper automatic die-cutting machine
>> Complete Monitoring and Control Solution Flowmeter for Single Seals and Seal Water Systems
>> New-Style New Arrival Single Sink Bathroom Cabinet with Sink for Carton Customization Certification
>> GM-4E-D5.0 Solid Carbide flattened End Mill for machining steel 45/55/63/65 HRC 2/3/4 Flute for Harden Steel CNC Milling Machine
>> Factory direct sales balcony outdoor convenient drying clothes rack drying rack clotheshorse
>> Drip Irrigation Hose Drip Tape Garden Hose Irrigation Dripper
>> Universal Hydraulic Radial Arm Drilling Machine
>> Wholesale Best Price Baby Scooter 3 Wheels Kids Ride on Toy Car
>> Kebida China High Quality Price Syringe Injection Molding Machine Kbd1400
>> Nutrition Enhancers Animal Feed Grade 98.5% L-Threonine//L Threonine
>> Factory Sale Good Materials with Logo Printing PP Handle Bag
>> Good Price Colorful Duplex Flat Woven Polyester Flat for Lifting
>> CNC Pipe Internal Threading Lathe CNC Qk1319 Precio De Torno CNC
>> Hot Sales in Europe Factory Wholesale 60cm 80cm 90cm Trowel Price for Power Trowel
>> Paper Plate Recycling Quail Egg Box Crate Nursery Food Tray Molded Pulp Packaging Making Machine for Sale
>> High Quality Fire Fighting PVC Rubber Hose
>> Big Size Teddy Bear Plush Animal Sitting Jumbo Children Toys
>> Automatic Rotary Two Color Rubber Gumboot Injection Molding Machine
>> Heavy Duty Disc Plow