Welcome to visit

Fully Automatic 3/5/7 Ply Corrugated Paper Production Line/Packaging Machinery

US$360,000.00-480,000.00 1 Set (MOQ)

Basic Info.

Model NO.
WJ150-1800
Condition
New
Certification
ISO 9001:2008, CE
Automation
Automatic
Suitable for
Paper
Paper Thickness
Thin Paper
Specification
70*10*5m
Trademark
yunxiang
Origin
Heibei China
Production Capacity
70 Set/Year

Product Description


type:WJ150-1800-ii type five layer corrugated paperboard production line:
1 Effective width 1800mm 2 Design produce speed 150m/min
3 Three layer work speed 100-140m/min 4 Five layer work speed 90-130m/min
5 Seven layer work speed ------------------- 6 The highest change single speed 100m/min
7 Longitudinal separation accuracy ±1mm 8 Cross-cutting precision ±1mm

note
Speed the above targets required to achieve:effective width1800mm,Comply with the following standards and ensure the paper's equipment condition 175 ºC heating surface temperature.
Top paper index 100g/m2--180g/m2 Ring crush index(N.m/g)≥8 (Water containing8-10%)
Core paper index 80g/m2--160g/m2Ring crush index(N.m/g)≥5.5 (Water containing8-10%)
In paper index 90g/m2--160g/m2 Ring crush index(N.m/g)≥6 (Water containing8-10%)
9 Flute combination
10 Steam requirement The maximum pressure 16kg/cm2 Common pressure10-12kg/cm2 use4000kg/Hr
11 Electricity demand AC380V 50Hz 3PH Total power≈220KW Running Power≈150KW
12 Compressed air The maximum pressure 9kg/cm2 Common pressure4-8kg/cm2 use1m3/min
13 space ≈Lmin70m*Wmin10m*Hmin5m(The actual drawing to provider to provide audited prevail)
Customer-owned section
1, steam heating system:proposal with 4000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.
2, air compressed machine,air pipeline,glue conveying pipe.
3, power supply,wires connected to the operation panel and line pipe.
4, water sources,water pipelines,buckets and so on.
5, Water, electricity, gas flush mounting civil foundation.
6, Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material.
7, Oil equipment,lubricating oil,hydraulic oil,lubricating grease.
8, installation,commissioning of food, accommodation.And provide installers with the installation.

fingerless type single facer
structural feature:
★adopt hood suction structure,matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed.
★High quality resin sand casting,wall thickness 200mm.Adopt independent gear box, Universal joint transmission structure.
★install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick.
★Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency.
★The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry.
★Automatic circulation system for glue, two-cylinder pneumatic gluing device, with good cushioning effect.
★Glue department using integrated slide structure,Glue roller surface after grinding engraved with 25 lines and pit-style textured hard chrome plating.
★corrugated roller adopt tungsten carbide dealing,diameter of the main corrugated roller¢ 320mm,Quenched→rough car→bore fine boring→shaft head shrunk-on→welding → tempering to stress→fine cars→coarse grinding→IF quenching→CNC grinding machine grinding→Hard chrome plating,hardness of surface is HRC58degrees.
★Active force variable frequency motor drive, energy efficient, low failure rate.
★Glue wide electric adjust to changes in the width of the paper used.
★Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy.
★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery.

double facer
Structural features:
★Heating plate surface by grinding treatment,hot plate width600mm,a total of 16 pieces heating plate,Cooling stereotypes Department 4 m.
Preheat board is made of contacts board, in accordance with the national standard of pressure container, enclosed the pressure container certificate and inspection certificate.
★Hot plate using the touch plate design structure. Plate movements using pneumatic spring-type structure.
★On both sides about conveyor belt deviation adjustment adopts automatic adjustment,2 sets of the conveyor belt tensioning system,one set is manual(fine tuning),the other is pneumatic adjustment(high speed).
★Thermal pipe heating plate temperature control points seven sections with temperature display.
★up cotton belt with double cylinder S cotton belt tensioning device.
★bottom cotton belt with s-shaped correction manually tensioning mechanism, structure simple and practical,under with manual fine-tuning.
★Drive roller coated with attached wear-resistant rubber ,showed a herringbone structure,With a high, ensure smooth cardboard output.
★Main drive motor for frequency conversion motor,low-speed torque,wide speed range ,reliable, and easy maintenance.
★hot plate internal for partition isolation structure,s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam.

>> 18 Inch Dual Comfort Wholesale Luxury Memory Foam Pocket Spring Mattress for Health
>> Needle Board Machine Knitting Machine Supplier with Global Engineering Support for Production
>> Ck0660 Automatic Lubrication System CNC Metal Machining Center
>> Wheel Speed Brake ABS Sensor for OEM 89543-35050
>> Electric Balance for Asphalt
>> Z3040*13 High Quality Cheap Price Economical Hydraulic Drilling Machine
>> Hot New Models iPhone13/ 16promax /15 Metal Lens Bracket + Lens Film; Apple 16 Double Bracket Anti-Fall Magnetic Suction Case Mobile Phone Case
>> Hospital Bed Mattress Medical Fabric PVC Vinyl Laminated Tarpaulin Fabric
>> H Type Chicken Cage Farm Equipment
>> Factory Direct Sale 10mm 12mm 16mm Kevlar Aramid Fiber Round Rope for Industrial Use for Wholesale Price
>> Factory Powder Coated Decoration Aluminum Expanded Metal Mesh For Architecture Cladding
>> 3.2 Tons Straight Arm Truck-Mounted Crane
>> Link Chain Quality Construction Machinery Parts 207-30-51191 Excavator Track Roller Guard PC360-7
>> Curve Surgical Stapler Disposable Skin Staplers and Removers Produced by a Reputable Factory
>> Quality Digital Sphygmomanometer Blood Pressure Machine Bp Machine Blood Pressure Monitor with Voice Broast
>> 500W 2000W Fiber Laser Cutting Machine for Carbon Steel Aluminium Brass
>> Liquors White Spirit Mainly Baijiu
>> Hastelloy C276 C22 C4 B2 B3 G30 G35 C2000 Nickel Alloy Steel Coil/Strip/Round Bar/Tube /Pipe/Sheet/Plate
>> terrace balcony steel railing cupboard designs stainless steel balustrade for front porch
>> Industrial Drill Re-Sharpening Machine for Efficient Tool Maintenance DRM-20s