Paper Pulp Stock Preparation High Middle Low Consistency Stainless Steel Ceramic Nylon PA66 Cleaner Tube Cone Nozzle

Product Description

Product Description
The Cleaner used in the paper industry is mainly divided into high-concentration cleaner, low-concentration cleaner, heavy slag cleaner, and light slag cleaner.
High-Density Cleaner pulp cleaning machine is for removing all kinds of heavy impurities in paper pulp, like staples, stones, glasses, etc. in stock preparation system. As coarse screening equipment, it is usually downstream equipment of the hydra pulper that can also be installed as an important piece of equipment to ensure the operation of downstream processing equipment.
Low-Consistency Cleaner is suitable for cleaning fiber suspension with a consistency of 0.4-1.2%, it can efficiently remove light impurities, hot melt impurities, heavy impurities, pulp rejects, etc. In addition, it can also remove foam plastics, chip fragments., ink particles, and air efficiently, which results in purifying stock in the approach system before the paper machine. it can make the coarse screens in the recycled paper fiber efficient, simplify processing procedures, and reduce power consumption.
Light slag cleaners compared with heavy slag cleaners, cover a wider range and are mainly used for slagging in the post-pulping stage or paper-making flow-feeding slagging.
Detailed Photos

Product Parameters
Working principle: Separate waste impurities from fibers by centrifugal force.
When the pulp enters the top of the slag remover from the tangential direction, the slurry flow produces a vortex movement, which accelerates downward along the cone of the slag remover in a spiral shape. The movement of the vortex generates centrifugal force, which causes the impurities heavier than water to move to the inner wall of the slag remover, while those with a relative density less than water move to the core of the vortex.

Model	ZSC-2	ZSC-3	ZSC-4	ZSC-5	ZSC-6	ZSC-7
Capacity: t/d	25-45	60-85	90-120	120-160	160-200	230-380
Consistency: %	2-5
Inlet Pressure (Mpa)	0.15-0.35
Outlet Pressure (Mpa)	0.1-0.25
Recoil water pressure (Mpa)	Inlet pressure plus 0.02 Mpa
Slagging method	Manual / Automatic / Intermittent / Continuous

Leizhan Production Bade
Company Profile

---

>> Ce Approved Plastic Products Injection Molding Machine
>> Medical Instrument of Disposable Syringe for Injection Pump (luer lock)
>> Factory Directly Offer Stainless Steel 201 European Type Insulated Barrel with/Without Tap
>> 4040 water filter reverse osmosis membrane shell FRP pressure vessel
>> Disposable CPE Gown Isolation Gown With Thumb Loop Yellow Blue Waterproof Gown
>> Food Flavour Fema 3228 Propyl Disulfide/Dipropyl Disulfide CAS 629-19-6
>> Large quantity and high quality cylindrical roller bearings CAMC Factory sales
>> Car Paint Auto Refinish 1K Bright Blue Car Color Paint
>> South N6+ WiFi Bluetooth 1000m Non-Prism Types of Total Station
>> Mini Reaper Binder Machine Sesame Harvester Reaper and Binder 4 Wheel China
>> Button Computer Industrial Electronic Sewing Machine Fastener Attaching Machine
>> flannel fleece bed sheet set
>> Horizontal and Vertical Single Phase 12t Electric Log Splitter
>> Household Concealed Shower Set 8 Inch Ultra-Thin Enhanced Water-Saving Shower
>> 6L2-V AC Voltmeter 50V 100V 150V 250V 300V 450V Pointer Voltmeter
>> Haide Apm Multifunction Thresher China Manufacturers Apm500 Multi Function Corn Husk Peeling Thresher for Exlectric or for Tractor
>> Air Compressor Parts Oil Stop Valve Kit Osv Kits Accessories Atlas Maintenance Service Parts (2901108400)
>> 120 Ton Plastic Injection Machine Syringe Barrel/Plunger/Gasket Thin-Wall Iml Projects Short Cycle-Time
>> Supply Top Quality 5, 7-Dihydroxyflavone Chrysin Powder
>> 3 Layer Disposable Ear-Hanging Face Mask