Eton Manual Cup Sealer for Bubble Tea with Indonesia Cup Size Et-D8

Product Description

ETON Manual Cup Sealer for Bubble Tea with Indonesia Cup Size ET-D8

Basic parameters of products
Name:	Cup Sealer
Brands:	ETON
Model:	ET-D8
Size:	230X277X455mm
Power:	220V
Frequency:	50Hz
Output:	300W
Out put:	300~400cup/h
Packaging:	Carton
MOQ:	50

Through film:
1. Get the film to be confirmed film winding direction, counterclockwise to identify, and put the rod fixed film. (Turn off the power when wearing film)
2. Note whether the film around the splints and film closely, if you can not closely integrated utility knife will need to use film paper tube inside of the bevel cut again into.
3. After the film put the film firmly with tape posted on the receipt paper tube.
Sealing procedures (panel operating instructions):
1. Power, turn the power switch, indicator lights, the thermostat is set to a predetermined temperature, when the green heating indicator light. When the hot plate reaches a predetermined temperature, the red indicator light is constant (sealing machine at work, electric heating and insulation means constantly alternating states, so green and red lights are constantly alternating, this is normal).
2. The plastic cups were placed in the lower mold slide, slide his hands pushed into the die to determine the location, after touching the limit switch, the module automatically after receiving the signal under the pressure seal, reset automatically rise, touched on travel switch on mold motor stops. film motor begins to turn, turned a predetermined length film by electric eye controlling the motor stops automatically.
3. After the film must be the motor rotation, only pulled lower mold slide the plastic cup into the lower mold slide pushed into the next cycle begins.

Precautions:
1, take a good ground to ensure safe use of electricity.
2, when the machine fails, you should turn off the power, resume normal temperature before troubleshooting.
3, the use of the process must not hand into the upper and lower mold , so as not to crush or burns.
4, carrying cup push die movement, the die must be carried out at the highest point of stop motion.
5, template-carrying cup to a later innermost allowed rebound, or upper and lower mold will be damaged.
6, the working voltage must be maintained at 220V ± 5%.

---

>> Best Price Standard Modular Aluminum Extrusion Portable Exhibition Booth for Trade Show
>> Textile Machine Part Return Pulley
>> N35/N45/52 Customizable Nickel-Plated NdFeB Arc Magnet for Industrial Conveyors and Assembly Lines Rare Earth/Block/Round/Permanent/Segmet/Neodymium Disc Magnet
>> ISO Certified Food Grade Aluminum Free Double-acting Baking Powder
>> High Quality Insulating Glass Crossbeam Gas Filling Production Line
>> 2025 New Crop Fresh Normal Wholesale Fresh Potato
>> Double-Ended Type-C Data Cable Suitable for Apple iPhone15iPad to PRO Dual Pd Fast Charging Tpyec Mobile Phone Car Laptop Dedicated Charger Cable
>> Corn Straw Shredder Machine and Grass Chaff Cutter for Livestock and Poultry Animal Silage Feed Production
>> High Quality Puck Shooting Sheet/HDPE Synthetic Ice Rink Dasher Board
>> Max Height 10m 320kg Electric Hydraulic Scissor Lift Man Lift/Diesel Tracked Scissor Lift
>> CE ISO approved surgical face mask medical facemask BFE 99
>> 2020 The Latest Automatic Filling and Sealing Equipment of High Quality Gel Hand Sanitizer Detergent with Duck Bill Type
>> UHMWPE Truck Dump Bed Liner/ Plastic UHMW Truck Lining
>> Jc Multifunctional Micro Tiller Rotary Tiller Loosening Plowing Tiller
>> Automatic Coffee Milk Powder Horizontal Packing Packaging Machine Doypack Pre-made Pouch Bag
>> High Speed and Easy Operate and Full Stainless Steel Chocolate Ball Mill
>> High Speed Auto CZ Channel Steel Interchangeable Purlin Roll Forming Machine
>> Plastic Mould Plastic Mold Injection Mould Injection Product
>> Large bamboo cutting board with 4 trays for easy food prep and cleanup
>> Modern Flower Vase Imitation Ceramic Flower Pot Decoration Home Plastic Vase Flower Arrangement Nordic Style Home Decoration