Multifunctional Medium stepper Speed Wire Cutting EDM Machine Lk1000

Product Description

1,The main machine adopts high quality 250 resin sand, which has been tempered many times to eliminate internal stress and keep the accuracy of machine tool unchanged for a long time.
2,The main machine adopts high quality 250 resin sand, which has been tempered many times to eliminate internal stress and keep the accuracy of machine tool unchanged for a long time.
3,Filament barrel motion bearing adopts all imported precision bearing, which has longer service life. The guide wheel adopts special high precision guide wheel and all imported bearings, which greatly increases the service life.
4.The filter device of slow-moving silk water tank, special water-based cutting fluid and multi-layer filtering system are adopted. The self-suction pump has better performance and longer service life, which lays a foundation for high precision and roughness of the processing surface.
5.One-stop automatic centralized oil supply device can lubricate X, Y guideways, screw rods, barrel guides and screw rods, and ensure the service life of machine tools.
6.The system is a complete set of WEDM solutions. AutoCut system is composed of AutoCut system software, motion control card based on PCI bus, high reliability, servo drive control motherboard, AC high frequency discharge board and sampling circuit. AutoCut system software includes AutoCAD WEDM module, NCCAD (including WEDM module), CAXA AutoCut plug-in and machine tool control software.
In order to ensure the accuracy of each machine, Longkai uses Renishau laser interferometer to check the positioning accuracy and repetitive positioning accuracy of the equipment. The high-configuration guide wheel and guide nozzle are adopted in the silk hauling system. The reasonable layout completely solves the problem of single side loosening and makes the machined surface achieve uniform roughness.
Long-life moving parts:
1.The X, Y and Z axes are all equipped with high precision ball screw and imported rolling linear guide, which can run smoothly and keep the accuracy of the machine tool.
2,Imported bearings are used in all moving bearings of machine , so that the reliability and durability of machine tool processing accuracy are higher and the long-term interests of customers are guaranteed.
3.The guide nozzle adopts the design of slow-moving wire. The UV axis is fixed and the guide nozzle can rise and fall automatically, so that it can be as close as possible to the workpiece's machined surface, prevent the molybdenum wire from shaking again, avoid the line marks on the cutting surface, and greatly improve the accuracy and roughness of the machined surface.
4The tightening system uses two-way automatic tightening device to tighten molybdenum wire in real time. The unevenness and accuracy of the processing plane caused by the inappropriate tightness of molybdenum wire in the process of processing are thoroughly solved.
The guide wheel adopts specially made gem guide wheel and customized sprinkler plate. Replacement can automatically return to the origin, greatly reducing the difficulty of replacing vulnerable parts, and facilitating the use of customers.
6.The imported linear guide rail and the imported switch are used for the barrel guide rail and the commutation switch to ensure the stability, high precision and long-term reliability of the barrel at high and low speeds.
Main Characteristics of Servo WEDM machine
1,Graphic driving technology reduces the labor intensity of workers, improves the efficiency of workers, and reduces the chance of misoperation.
2,For users of Windows XP and other versions, the software is easy to use, that is to say, learning is learning.
3,Directly embedded in AutoCAD, NCCAD, CAXA and other versions of software, the integration of CAD/CAM is realized, and the machinable object of WEDM is expanded.
4,Four-axis linkage control technology is used in the processing of taper workpiece; three-dimensional design of processing trajectory; and compensation of guide wheel radius, wire diameter, unilateral discharge gap and elliptical error of large taper to eliminate the theoretical error of taper processing;
5.With multi-card parallel technology, one computer can control multiple WEDM machines at the same time.
6,It can carry out multiple cutting, with the function of user-maintained process library, intelligently control the processing speed and parameters, so as to improve the surface finish and dimensional accuracy, and make multiple processing simple and reliable.
7,This software optimizes the processing of super-thick workpiece (more than 1 meter) to make its tracking stable and reliable.
8,Connection network management: In order to facilitate the operation of one person and multiple computers, drawing input and export, equipment can realize network connection.

Performance of the whole machine		Equipment type	unit	LK-1000
	Fuselage	Host Size (Length * Width * Height)	mm	2400*2100*2300
		Total weight	kg	5000
	Workbench	Workbench size (width x length)	mm	1350*980
	travel	X-axis travel	mm	800
		Y-axis travel	mm	1000
		Z-axis travel	mm	300
	CNC Power Supply	pulse width	us	1-250
		Silk speed		0-3
		Cutting number	time	1-7
		Mini.Mechanical Driving Equivalent	um	1
		Pulse Resolution	um	0.4
	Processing capacity	Spindle stroke (electrically adjustable)	mm	250
		Max.cutting slope/workpiece thickness		6°~30°/80mm
		Max. Bearing Capacity of Workbench	kg	1200
	Machining accuracy	Location accuracy X/Y	mm	≤0.01
		Repeated positioning accuracy X/Y	mm	≤0.005
		Multi-tool Cutting Accuracy	mm	≤0.005( 40mm,Cut one and repair two. MaterialSKD11orCr12,HRC58)
		Optimum Surface Roughness	um	Ra≤1.0(SKD11orCr12,HRC58))
	Processing efficiency	Maximum cutting efficiency	mm2min	≥220
		Common cutting efficiency	mm2min	≥140
		Max. Processing Current	A	≥6-8
		No-load Voltage of Machining Power Supply	V	100
		Power consumption	KW	≤2.3
	Silk traveling system	Electrode wire diameter	mm	∮0.12-∮0.2
		Silk barrel traveling speed		frequency control
		Tightening method
		Wire travelling speed	m/s	3-12
	working groove	Filtration accuracy	um	<10
		Filtration mode		Slow-Walking Filtration
		Working fluid		Special cutting fluid
	Environment and electricity	electric power		380V±10% / 50/60Hz / 2kVA
		temperature		T15-30ºC / humidity40-80%
		pressure	kpa	86-106kpa

Equipment accessories

machine	S/N	name	Comment	manufacture
Fuselage part	1	body	Quality 250 Resin Sand Casting	China
	2	X.Y Axis Screw	Precision ball screw	Taiwan
	3	X-axis and Y-axis guideways	Precision linear guide	TBI
	4	Fuel injection pump	Computer Auto.	China
	5	Guide wheel	Thickened Gemstone Guide Wheel	domestic
	6	Ruby guide nozzle	patented product	domestic
	7	reversing switch	Omron	Japan
	8	Filtration system	Filtration mode of slow filament	Longkai
Power supply part	9	Power Control Cabinet	High Performance Control Power Supply	Medium wire system
	10	industrial control computer	Fan-free dual-core CPU (4 threads)	Longkai
	11	Industrial Display Screen	Youda	Taiwan
	12	AC servo motor	Panasonic	Japan
	13	AC Servo Motor Driver	Panasonic	Japan
	14	relay	Omron	Japan
	15	Contactor	Schneider	France

Outbound Documents

S/N	name	QTY	unit	P.S.
1	Medium speed machine	1
2	NC control cabinet	1
3	Filtration tank	1
4	Packing Technical Documents	1
5	Hold-all	1

Our main products :
* Servo Mid-speed WEDM machine
* Stepper medium speed wire cutting machine
* High efficiency fast Wire cutting
* CNC drilling machine
* Drilling EDM
* EDM molding machina
* Grinding machine
* Turret milling machine
* CNC drilling and milling machine
* CNC engraving and milling machine
* Vertical machining center
All the above products have passed CE, SGS certificates.
Our Strength:
* Over 12 years manufacturing experience in CNC lathe machine.
* The company abides by the concept of "providing high-quality,stable and cost-effective products and good services to the clients by relying on advanced and reliable technology,
* Always adheres to a large amount of research and development investment and continuous engineering improvement
* Longkai EDM machines are with high cutting accuracy, high cutting speed, high surface finish and high stability.
* We have always been in the leading position of the reciprocating wire cutting machine, electrical processing power and control technology.
After-sale Services:
Warranty is one year.
We would offer the parts (quality problem) free of charge during this period, freight collect.

---

>> Cheap Hammer Scrap Metal Iron Steel Crusher Metal Crusher Machine for Car
>> Z3063X20 High Quality Universal Hydraulic Radial Drilling Machine Price
>> Sleep Therapy Device Improve Sleep And Insomnia Treatment China Manufacturer
>> Wholesale Customized Plain Aluminum Blank Sublimation ID Name Pet Tag Pendant Necklace Custom Logo Metal Laser Engraved Luxury Military Stainless Steel Dog Tag
>> UICE 2022 Wholesale Surf Leash Polypropylene Webbing High Quality Neoprene Waist Leash
>> Second Hand Used 1cavity Cool Runner Pallet Plastic Mould/Mold
>> Reverse osmosis Ro Pressure Vessels 8080 ro pressure vessels pressure vessel membrane shell
>> One-Button Start Pad Kraft Fill Making Cushion Void Paper Bubble Making Machine
>> Round Grass Hay Bale Crusher Alfalfa Straw Bales Shredder Machine
>> Engine Timing Gear for Chevrolet 3.6L OE 12612838 12612840 TG5015
>> Y Connector Hemostasis Device Sets
>> Good Price Baseball Hat Automatic Machine Curved Visor Blocking Ironing Machine
>> Horn Switch for Perkins Mf240 OEM Number 1668816m2
>> Outdoor Playground Equipment Inflatable Bouncer for Kids Factory
>> Compact Fertilizer Machine for Small-Scale Organic Waste Processing, Poultry Equipment, Agricultural Machinery
>> Looking for Partner Purchasing All Products in China, Serving Foreign Buyers Dropshipping Forwarder
>> Plastic Bottle Water 5L 10L 20L 5gallon Barrel Liquid Jar Preform and Cover Lid Injection Molding Machine
>> Hesheng 100% New PP Woven Plastic Bag Sewing Machine
>> Chinese factory price speaker grill perforated sheet metal mesh
>> High Output 100kg/H PE Film Blowing Machine Sj-A55 Model 800mm Film Width with Rotary Die Head and Sigle Winder