7075 T6/T62/T7351 Aircraft Aerospace Aviation Aluminum Alloy Sheet Plate

Product Description

7075 T6 T62 T7351 aluminum alloy sheet plate Product Description
7075 T6 T62 T7351 aluminum alloy sheet plate is currently the most widely used 7 * * * aviation Aluminum Alloy, main supply varieties of aluminum or aluminum, heat treatment condition of O, T6, T73, T76. The static strength of T6 is the highest, the ductility is the lowest and the fatigue is the worst. It is sensitive to stress corrosion cracking, and toughness decreases with the decrease of temperature. So the T6 state is not applied to cryogenic working parts. T73 has the lowest state strength, but has high fracture toughness and excellent resistance to stress corrosion cracking and denudation. The performance of T76 is between T6 and T73. Compared with T6 state, it has low strength but good resistance to stress corrosion. Compared with T73 state, its strength is high, but its stress corrosion resistance is poor.
Product Parameters

Chemical Composition of 7075 alloy

Alloy

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Zr

Others

Al

Each

Total

7075

0.40

0.50

1.2~2.0

0.3

2.1~2.9

0.18~0.28

~

5.1~6.1

0.20

~

0.05

0.15

Remainder

Alloy	Alloy Series	Main features	σb Value/MPa	Working Temperature/ºC
7075	7075 series	7075 T6 T62 T7351 aluminum alloy sheet plate is currently the most widely used 7 * * * aviation Aluminum Alloy, main supply varieties of aluminum or aluminum, heat treatment condition of O, T6, T73, T76. The static strength of T6 is the highest, the ductility is the lowest and the fatigue is the worst. It is sensitive to stress corrosion cracking, and toughness decreases with the decrease of temperature. So the T6 state is not applied to cryogenic working parts. T73 has the lowest state strength, but has high fracture toughness and excellent resistance to stress corrosion cracking and denudation. The performance of T76 is between T6 and T73. Compared with T6 state, it has low strength but good resistance to stress corrosion. Compared with T73 state, its strength is high, but its stress corrosion resistance is poor.	421~538	<125

Alloy	Type	Temper	Size/mm	Direction	σb/MPa		σp 0.2/MPa
					A	B	A	B
7075	Aluminum sheet	T6 T62	δ0.305~0.991	L	524.4	538.2	476.1	496.8
				LT	524.4	538.2	462.3	483.0
			δ1.016~3.175	L	538.2	552.0	483.0	496.8
				LT	538.2	552.0	469.2	483.0
			δ3.200~6.325	L	538.2	552.0	489.9	503.7
				LT	538.2	552.0	476.1	489.9
			δ6.35~12.675	L	510.6	524.4	448.5	462.3
				LT	538.2	538.2	462.3	476.1
			δ12.7~25.4	L	510.6	524.4	455.4	469.2
				LT	538.2	552.0	469.2	483.0
			δ25.425~50.8	L	503.7	517.5	441.6	448.5
				LT	531.3	545.1	462.3	476.1
			δ50.825~63.5	L	496.8	510.6	414.0	427.8
				LT	524.4	538.2	441.6	455.4
				ST	483.0	489.9	407.1	420.9
			δ63.525~76.2	L	476.1	489.9	386.4	400.2
				LT	489.9	503.7	400.2	414
				ST	455.4	469.2	386.4	400.2
			δ76.225~88.9	L	469.2	483.0	358.8	372.6
				LT	489.9	503.7	400.2	414.0
				ST	448.5	462.3	372.6	379.5
			δ88.9~101.6	L	441.6	455.4	331.2	338.1
				LT	462.3	476.1	372.6	386.4
				ST	420.9	434.7	345.0	358.8
		T7351	δ12.7~25.4	L	469.2	483.0	393.3	407.1
				LT	476.1	489.9	393.3	407.1
			δ25.425~38.1	L	462.3	476.1	393.3	407.1
				LT	469.2	483.0	393.3	407.1
			δ38.125~50.8	L	455.4	469.2	379.5	393.3
				LT	462.3	476.1	379.5	393.3
				ST	434.7	448.5	358.5	372.6
			δ50.825~63.5	L	448.5	462.3	358.8	372.6
				LT	455.4	469.2	365.7	379.5
				ST	427.8	441.6	338.1	358.8
			δ63.525~76.2	L	437.7	448.5	338.1	365.7
				LT	448.5	455.4	358.8	365.7
				ST	414.0	427.8	324.3	345.0

Alloy	Temper	Aircraft models	Application parts and typical parts
7075	Aluminum sheet: T6,T62,T7351 Aluminum plate: T6,T62,T7351	Widely used	Panels, beams, frames, wing ribs, joints, etc.

---

>> Contemporary Style Solid Brass Chrome Finished Concealed Basin Mixer
>> Twin impeller high pressure small water pump brass Impeller
>> Small Mixer 2m3 Cement Drum Mixer Portable Concrete Mixers
>> simano surf rod fishing rod hand draw fishing rod srilanka price
>> pistachios 10kg zip lock pistachio nuts food packaging bag dry roasted unsalted pistachio
>> CE Animal Feed Pellet Machine Price
>> Ck6150 High Precision Speed 1000mm CNC Horizontal Multifunctional Metal Cutting Lathe Machine
>> CE Approved Universal Cylindrical Grinder Machine (M1420)
>> Energy Saving Outdoor Waterproof Full Color LED Display 3.91mm
>> Floating Water Pad Mat Tear-resistant 2-layer XPE Roll-up Floating Island Pool Lake Ocean Swimming Pool Floating Pad
>> Custom Handmade Leather Pencil Bag Pocket Pen Sleeve Pouch Case
>> Full Electric Walkie Stacker 1.5t Electric Pallet Stackers 1500kg 2000kg 3000kg Capacity Stacker
>> Women′ S Summer Trend All-Match Non-Slip Wear-Resistant Outerwear Sandals Beach Shoes
>> Hot-Selling Brand Highrich 4000L Automatic Diesel Volumetric Self Loading Concrete Mixer Truck
>> High quality 2600ml bag 500ml urine meter drainage bag
>> PVC Ceiling Machine / Wall Panel Plastic Extruder
>> High Quality Low Price BOPP Adhesive Tape Free Sample
>> Two Layers Co-Extrusion PE Film Blowing Machine for Packing Bag
>> Chtools 60mm Steel Hole Drilling Magnetic Drills for Sale
>> Lipolaser dual wavelength 650nm 980nm lipo laser machine portatil