| US$350.00 | 2 pieces (MOQ) |
| Products Status | Stock |
| Product Name | IntelX710-DA2 |
| Model Number | IntelX710-DA2 |
| Place of Origin | China |
| Lifecycle | Active |
| Distrib. Inventory | Yes |
| Ordering Part # | Intel® Ethernet Network Adapter X710-DA2 for OCP 3.0 |
| Generation | 8GFC |
| Optical Data Rates | 10/1GbE |
| Ports | Dual |
| Optics | Short wave lasers with LC type connector |
| Host Bus Type | x8 lane PCI Express® 2.0 |
| Operating Humidity | 5% to 95% non-condensing |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -40° to 70° C |
| Operating Voltage (V) | +3.3V, +12V |
| OS Support | Linux, NetWare, VMware |
| Power Supply | 1.8V, 1.2V, 0.9V |
| Industry Standards | ANSI Fibre Channel: FC-PI-4, FC-AL-2, FC-DA, FC-FLA, FC-FS-2, FC-FS-2/AM1, FC-GS-6, FC-HBA and SMI-S v1.1, FC-LS, FC-PLDA, FC-SP, FC-TAPE, FCP through FCP-4, Fibre Channel class 2 and 3, PCI Express Base Specification Rev. 2.1, PCI Express Card Electromechanical Specification Rev. 2.0, PHP hot plug-hot swap, SBC-3 |
| Whats in the box | Each box includes: · Quantity 1, low-profile Host Bus Adapter · Quantity 1, full-height bracket · Quantity 1, low-profile bracket Quantity 1, Firmware download sheet and RoHS sheet |
| Physical | Short, low profile MD2 form factor card 167.64mm x 68.91mm (6.60" x 2.71") Standard brac |
| Cable Support | 50/125μm (2000MHz*km BW)-up to 150m, 50/125μm (500MHz*km BW)-up to 50m |
| Data Transfer Rates | Supports 8GFC, 4GFC and 2GFC link speeds, automatically negotiated |
| Hardware Environmen | PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family |
