25 Meter 25000mm Working Radius Used on Barge/Pontoon/Jetty for Sone Chips/Sand/Clinker/Scrap Port Handling Cranes

Product Description

Introduction:
The steel grabber material handling machine is a kind of scrap loading and unloading equipment. It can realize a variety of operation functions by changing the gripper material handling and working device. Therefore, it is also called a grabber, which is widely used in steel plants, smelters, ports, docks and scrap transfer. Special engineering machinery in the industry, equipped with different grippers (such as plum grab, shell grab, round grab, billet grab, hydraulic shear, hydraulic pliers, etc.) to meet different customer conditions for scrap, ore, coal The demand for bulk fertilizer and yellow sand loading and unloading.
1.Economical and reliable
Single pump constant power, dual pump cross power control, stable engine output;
Negative flow pump control method and good economy;
The hydraulic oil radiator and engine water cooler are cartridge-mounted, compact and efficient;
Hydraulic hoses and seals are fixed with imported products and have high reliability.
2.Reasonable design
The boom and the arm are hydraulically locked, and the impact resistance is good, and both of them realize the double pump confluence, the stick regeneration, the multi-motion composite, and the work is stable;
Two speeds of walking speed are selected to achieve two speeds to meet different working conditions;
Upper arm brake for walking and swinging mechanism, hydraulic opening, good safety;
Flexible configuration according to different grades of users;
The power system, hydraulic system and working device can be freely and flexibly configured according to user requirements;
The working device adopts the structure of "straight moving arm and curved stick", and is equipped with electric suction cup and lifting driver's cab;
3.High efficiency and environmental protection
Simple operation, convenient maintenance and safe and reliable performance;
Environmental protection, energy saving, low noise and long service life;
The far-infrared remote control system can realize long-distance operation; the crawler type traveling device has small grounding pressure, stable walking and flexible steering.
Advantage:
1.The engine air filter is double-filtered, which can well cope with the problem of large dust on the scrap picking operation site. Especially in a closed working environment indoors, the dust concentration is greater. The dual filtration system increases engine efficiency and extends service life.
2.The cab can choose height adjustable type or fixed type with different height.The cabin is shockproof and soundproof type.It has wide view and equipped with air conditioning and audio, air seats, safe and comfortable.
3.Power system, hydraulic system and grabbing implements can be customerized according to different working size and work requirement.
4.Standard central lubrication make daily maintenance easy.
5.Diesel and electric hybrid drive can be driven by both internal combustion engine and electric motor drive.
Driven by electric motor, it has low maintenance cost, no pollution and low failure rate. 4. Motor operation is one third of the cost of internal combustion engine operation.
6.Original imported hydraulic system, exclusive electronic control system, the perfect integration of mechanical, electric and hydraulic integration.
7.widened and extended "X" frame, standard with 800mm aluminum plate, strong stability, to ensure the efficient operation of the whole machine.
8.It adopts high-strength wear-resistant steel, shell-type grab, plum grab, electromagnetic sucker and other accessories to flexibly switch, and can be customized according to working conditions.
9.Original imported hose, steel wire surround, to prevent oil leakage, high reliability.
10.Equipped with a hydraulic oil strong air heat sink to ensure that the hydraulic oil temperature rise of the equipment does not exceed 80 °C. Effectively extend the life of hydraulic seals.
1. Main configuration and parameters

project		Company	YCYGSZ1200
Working weight		Kg	115000
engine	model	Cummins	QSZ13-C550-30
	power	Kw	410
	speed	RPM	1900
	Maximum torque	N.m	2300
	displacement	L	13
	Air intake mode	Turbocharging, air intercooling
	emission standard	/	Non road stage III
	Diesel tank capacity	L	640
Motor	model	Shandong Yineng	YE2-355M-4
	power	KW	280
	speed	RPM	1480
	working voltage	V	380
	frequency	HZ	50
	protect	Leakage, overheating and overload
Hydraulic system	Main pump	Kawasaki, Korea	K3V280DT
	Rated flow	L/min	2X520+30
	working pressure	Mpa	32
	Main valve	KYB	KVMG-400
	Capacity of hydraulic oil tank	L	720
Hydraulic motor	rotation	Kawasaki, Japan	M5X180
	Number of slewing motors	platform	2
	Walking motor	South Korea Xingpu	FE22A
performance parameter	Slewing speed	RPM	10
	Walking speed	Km/h	0~2.5
	Maximum traction	Kn	1000
	Maximum climbing gradient	%	15
	Grounding voltage	KPa	98.3
cab	Dimensions	Mm	1800x1000x1620
Slewing support	Track diameter	Mm	1800
Cylinder		Imported seal and boom equipped with explosion-proof valve
All vehicle hose		Gates / Eaton
lubrication system		Centralized lubrication
Slip Ring		800A
Cab interior		Aviation seat, air conditioning, hydraulic operation
Four wheel belt		DH series
air conditioner		24 V vehicle air conditioner

2. Main dimensions

Main dimensions	Company	YCYGSZ1200
Upper full width (excluding body pedal)	Mm	3600
Full width of cab	Mm	1000
Full height cab	Mm	10000
Cab fixed heightening height	Mm	1500
Driver's horizontal line of sight	Mm	9550
Distance between guide wheel and driving wheel	Mm	6500
Track length	Mm	7450
Bandgap	Mm	6500
Track shoe width	Mm	900
Total width of vehicle with track shoes	Mm	8110
Total length	Mm	16800
Tail turning radius	Mm	5200
Counterweight height above ground	Mm	6550
Boom length	Mm	11000
Length of two arms	Mm	8500
Grab volume	M3	3.5

3. Hydraulic system

Main pump	type	Variable axial piston pump
	Maximum flow	2x520L/min
	number	2
Pilot pump	type	Gear pump
	Maximum flow	30L/min
	number	1
Rotary motor	Relief valve	28Mpa
Main relief valve	Working device	32Mpa
	Walking device	35Mpa
	Grab part	28Mpa
	Rotating part of grab	12Mpa

4. Grab parameters

project	Company	YGB3.5
dead weight	Kg	2380
Grab volume	M3	3.5
Maximum opening size	Mm	2940
Empty inside grab	Mm	2000
working pressure	Mpa	28
Grab rotation angle	/	360° unlimited
Body material	/	Q345B
Bucket tooth material	/	NM400

---

>> Outdoors Travel Single Portable Double Parachute Hammocks Camping Hammock
>> 3kW/3000W OBC/on board charger/ 72V35A/60V35A/48V50A/24V50A/Factory supply used in EV
>> Custom Sheet Metal Stamping Anodized Stainless Steel Laser Cutting Service Aluminum Sheet Metal Fabrication Services
>> Automatic Cow Sheep Feed Mixer Mixing and Sprinkling Machine High Capacity Feed Mixer
>> 600W Multi Output Power Module Computer ATX Power Supply
>> 3500/22-01-02-00 3500/22-01-01-00 3500/22 | BENTLY NEVADA MODULE PLC DCS In Stock
>> Warm in winter and cool in summer broken bridge aluminum alloy jalousie folding windows
>> 36 Colors Watercolor Painting Set Box with and One Brush
>> Winter Fold Pendant Crescent Vagabond Polyster Lady Handbag Nylon Shoulder Bag
>> Ailusi Higher Shear Homogenizer Machine High Efficiency Vacuum Emulsifier Machine
>> 5ton Pyrolysis Plastic Plant Refining Used Plastic
>> Petroleum DN800 Electromagnetic Flow Meter Magnetic Type
>> Taijia handheld portable ultrasonic flowmeter tl-1 large size transducer ultrasonic bulk flow meter water flowmeter
>> Suitable Width 600-1200mm Rubber Sheet Cooling Equipment/ Rubber Batch off Cooler Machine
>> Plastic Injection Mold Electric Car Bumper Spare Parts Mould Auto Accessories Audi
>> Superphosphate Production Line with 20, 000-100, 000 Tons/Year
>> 6000 Psig 2.6L High Pressure Condensate Pot Swagelok Parker Type Condensate Pots
>> Customized High Quality Cheap Organic With Juice Groove Bamboo Cutting Board
>> 10W RGBW 4in1 Pin Spot Mini LED Club Party Light
>> Construction Hoist Small Crane Seagull/OEM Wooden Case Boat Trailer Hand Winch