High Mix Plastic Injection Molding Machine Hxm1500

Product Description

1.Picture

MODEL:HXM1500
TECHNICAL PARAMETER TABLE			A	B	C
INJECTION UNIT	SCREW DIAMETER	mm	130	140	150
	SCREW L/D RATIO	L/D	23	22	21
	INJECTION CAPACITY IN THEORY150130112882	cm3	8627	10005	11486
	INJECTION WEIGHT(PS)	g	7851	9105	10452
		oz	276.9	321.1	368.8
	INJECTION PRESSURE	MPa	180	155	135
	INJECTION RATE	g/s	1240	1438	1651
	PLASTICIZING CAPACITY	g/s	120	140	160
	SCREW SPEED	rpm	100
CLAMPING UNIT	CLAMPING FORCE	KN	15000
	MOVING MOULD-PLATE STROKE	mm	1500
	MAX. MOULD HEIGHT	mm	1500
	MIN. MOULD HEIGHT	mm	700
	SPACE BWTWEEN TIE-BARS (W×H)	mm	1450*1350
	HYDRAULIC EJECTOR FORCE	kN	380
	HYDRAULIC EJECTOR STROKE	mm	400
	EJECTOR NUMBER	n	25
OTHERS	PUMP PRESSURE	MPa	17.5
	MOTOR /DRIVING POWER	KW	38+38+38+38
	HEATING CAPACITY	KW	103.5
	MACHINE DIMENSION (L×W×H)	m	14*3.3*4
	MACHINE WEIGHT	t	87.5
	OIL TANK CAPACITY	L	2000

Product Advantages:
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
2.Application
3.Processing,assembling production line
5.Loading containers
6. Customer case
Client in China produce shoe for many famous companies
7.Client in Malaysia

---

>> High Stability Corrosion Resistance Mining Double Rotor Hammer Crusher
>> Lab Supplies Disposable Universal Transparent 20UL Pipette Tips with Filter
>> Customized Aluminum Flower Pot Aluminum Planter Box Supplier
>> Qt4-18 Concrete Fully Automatic High Pressure Control Box Hollow Blocks 6inches and 9 Inches Block Making Machine Production Line in Tanzania
>> Vertical Mixer for Plastic
>> Fuchang Waste Paper Agricultural Waste Rice Straw Material Egg Tray Forming Machinery Egg Carton Box Making Machine
>> High Quality Hotsales Bus Glass Windshield, Side Window Glass, Rear Window Glass for Bus
>> China Vertical Machining Center Cutting CNC Metal Milling Machine Vmc850
>> Anti Rustic 304 Stainless Steel Kitchen Tap Kitchen Faucet (BMS-2001)
>> Cell Phone Case Make Machine / Injection Machine Thin Wall High Spped Injection Molding Machine
>> Running Machine, Semi Commercial Treadmill, Fitness, Treadmill
>> Automatic Panel CNC Carbon Steel Stainless Steel Aluminum Press Brake Bending Machine for Metal Sheet
>> Precision Air Cushion Machine for Superior Sand Casting
>> Bubble Egg Waffle Stick Taiyaki Mini Pancake Automatic Donut Machine Ice Maker Mini Fried Ice Cream Roll Machine CE Fried Ice Cream Roll Ice Cream Machine
>> 2ton2000kg Single-Chained Crane Lifting Equipment Hhbb Low Headroom Operating Type Electric Chain Hoist with Trolley CE Approval
>> 20ton Double Speed Electric Chain Hoist Remote Control
>> Glass Door and Window Lift Electric Small Lifting Photovoltaic Crane Photovoltaic Panel Portable
>> 9*13mm TPU Recoil Water Hose, Garden Coil Tube (100%polyurethane)
>> Original Japanese Used Crawler Excavator Sany Sy135c-9 5 Ton Excavator Sany
>> Automatic CNC Press Brake Bending Center Panel Bender for Metal Box