LY2000GH-T1 1.3MW Petroleum Associated Gas High Pressure Generator Unit(APG) technical parameters 50HZ
| Engine Model | LY20V170-T1 |
| Enginepower | | kW | 1298 |
| Rated speed | | r/min | 1500 |
| Average effective pressure | | MPa | 1.17 |
| Exhaust gas temperature | | ºC | ≤550 |
| Wet exhaust gas flow rate | About | kg/h | 7442 |
| Combustion air flow rate | ±8% | kg/h | 7120 |
| Intake temperature after | ±5 | ºC | 50 |
| Ventilation capacity | About | kg/h | 36957 |
| Engine technical parameters |
| /Cylinder Diameter/Stroke | | mm | 170/195 |
| Displacement | | dm3 | 88.5 |
| Average piston speed | | m/s | 9.75 |
| Lubricant capacity | | dm3 | 300 |
| Average consumption rate of lubricant at full load | | g/kWh | ≤0.3 |
| Alternator |
| Efficiency | | % | 96.3 |
| Energy Balance | LY2000GL-T1 |
| 5)Output electric power5) | | kW | 1250 |
| High-temperature coolant heat | ±8% | kW | 1099 |
| Low temperature coolant heat | ±8% | kW | 115 |
| 120ºC Exhaust gas cooling to 120°C heat | ±8% | kW | 708 |
| Engine radiant heat | About | kW | 48 |
| Heat radiated by the alternator | About | kW | 48 |
| Gas consumption | ±5% | kW | 3492 |
| Electricity efficiency | | % | 35.8 |
| Thermal efficiency | | % | 51.8 |
| Total efficiency | | % | 87.6 |
| System Parameters |
| /High temperature coolant min/max flow | | m3/h | 70/90 |
| Kvs EngineKvsValue | | m3/h | 46 |
| Low temperature coolant flow | | m3/h | 45 |
| Kvs IntercoolerKvsValue | | m3/h | 72 |
| Engine Coolant Capacity | | dm3 | 210 |
| Intercooler coolant capacity | | dm3 | 52 |
| /High temperature coolant temperature inlet/outlet | | ºC | 76/88.5 |
