SSD1963 Adapter 7.0 Inch 800X480 Stm32 Esp32 MCU Parallel Port Capacitive Touch LCD Module

Product Description

SSD1963 Adapter 7.0 Inch 800x480 STM32 ESP32 MCU Parallel Port Capacitive Touch LCD Module

Product Description Product Specification:
The product is a 7.0-inch TFT LCD display module, which consists of two parts: 7.0-inch display and ssd1963 adapter board. The display module uses 800x480 resolution, supports rgb565k color display, and uses ssd1963 driver IC. The display module also supports the switching function of capacitive touch screen and resistive touch screen.
7.0-inch color screen, support 24BIT RGB 16.7M color display, display rich colors Support 800x480, the display effect is very clear Support 8 bit or 16 bit parallel bus transmission Compatible with MCU interface connection of atomic development board It supports the switching between capacitive touch screen and resistance touch screen, and the capacitive touch screen can support up to 5 touch points Directly plug in esp32 development board Compatible with STM32 development board flexible cable and straight connection of needle Support PWM backlight brightness adjustment Provides a rich sample program for STM32 and C51 platforms Military-grade process standards, long-term stable work Provide underlying driver technical support

Name	Parameter
Display Color	RGB888 16.7M (compatible with rgb5665k) color
SKU	MRB7110(no touch), MRB7111(have touch)
Screen Size	7.0(inch)
Type	TN
Driver IC	SSD1963
Resolution	800x480 (Pixel)
Module Interface	8Bit or 16Bit parallel interface
Touch Screen Type	Capacitive or Resistive touch screen
Touch IC	FT5426(Capacitive touch)
Active Area	153.84x85.63(mm)
Module PCB Size	164.90x124.27(mm)
Operating Temperature	-10ºC~60ºC
Storage Temperature	-20ºC~70ºC
Input Voltage	5V
IO Voltage	3.3V
Power Consumption	101mA(The backlight is off), 501mA(The backlight is the brightest)
Rough Weight(Net weight)	258(g)

Detailed Photos The appearance of the product is shown in Picture 1 ~ Picture 5
Picture1. Front view of display module
Picture2. Back view of display module
Picture3. Front view of adapter board
Picture 4. Back view of adapter board
Picture 5. Combination picture

Interface Definition Hardware Description:
Picture 6. The module interface and selection circuit
Each identification circuit in Picture 6 is described as follows:
1) --DITHB selection circuit
2) --U/D selection circuit
3) --L/R selection circuit
4) --Screen resolution selection circuit
5) --P2 interface (Used to connect the adapter board)
6) --P3 interface (Not used)
1. Screen internal Dithering display function settings
Weld the 0 position resistance of DITHB and disconnect the 1 position resistance to enable the internal Dithering display function of the display panel;
Weld the 1 position resistance of DITHB, disconnect the 0 position resistance, and turn off the internal Dithering display function of the screen;
Default welding 0 position resistance, disconnect 1 position resistance
2. Screen display up and down flip settings
Weld the resistance at position 0 of U / D, disconnect the resistance at position 1, and the screen will turn down;
Weld the resistance at position 1 of U / D, disconnect the resistance at position 0, and the screen will turn upward;
Default welding 0 position resistance, disconnect 1 position resistance
3. Screen display left and right flip settings
weld the resistance at position 0 of L / R, disconnect the resistance at position 1, and the screen will turn to the left;
Weld the resistance at position 1 of L / R, disconnect the resistance at position 0, and the screen will turn right;
Default welding 1 position resistance, disconnect 0 position resistance
4. Screen resolution selection
As shown in the screen resolution selection circuit, the module supports screen switching of 800x480 and 1024x600 resolutions.
Weld M0 resistance to GND, M1 resistance to VCC, select 1024x600 resolution;
Weld M0 resistance to VCC, M1 resistance to GND, and select 800x480 resolution;
The adapter board interface is shown in Picture above:
1) --40pin flexible cable output interface
2) 4) --In line interface of esp32 development board
3) --STM32 development board 32pin flexible cable input interface
5) --STM32 development board 34pin pin input interface
STM32 development board row pin input interface pin description

Number	Pin name	Description
1	CS	LCD reset control pin( low level enable)
2	RS	LCD register / data selection control pin(high level: register, low level: data)
3	WR	LCD write control pin
4	RD	LCD read control pin
5	RST	LCD reset control pin( low level reset)
6~21	D0~D15	LCD 16 bit data bus pin (use d0 ~ D7 in 8-bit mode)
22	GND	Module power ground pin
23	TE	LCD tearing effect signal pin (read only)
24	NC	No definition, reserved
25	NC	No definition, reserved
26	GND	Module power ground pin
27	GND	Module power ground pin
28	5V	Module power supply positive pin (connected to 5V)
29	TMI	Resistance touch screen SPI bus read data pin (capacitor touch screen not used)
30	TMO	IIC bus data pin of capacitive touch screen (SPI bus write data pin of resistance touch screen)
31	PEN	Touch screen interrupt detection pin(Low level when a touch occurs)
32	NC	No definition, reserved
33	TCS	Capacitor touch screen reset pin (resistance touch screen chip selection pin)
34	TCK	IIC bus clock pin of capacitive touch screen (SPI bus clock pin of resistance touch screen)

STM32 development board flexible cable input interface pin description

Number	Pin name	Description
1	TCK	IIC bus clock pin of capacitive touch screen (SPI bus clock pin of resistance touch screen)
2	TCS	Capacitor touch screen reset pin (resistance touch screen chip selection pin)
3	PEN	Touch screen interrupt detection pin(Low level when a touch occurs)
4	TMO	IIC bus data pin of capacitive touch screen (SPI bus write data pin of resistance touch screen)
5	TMI	Resistance touch screen SPI bus read data pin (capacitor touch screen not used)
6	5V	Module power supply positive pin (connected to 5V)
7	GND	Module power ground pin
8	GND	Module power ground pin
9	NC	No definition, reserved
10	NC	No definition, reserved
11	TE	LCD tearing effect signal pin (read only)
12~27	D15~D0	LCD 16 bit data bus pin (use d0 ~ D7 in 8-bit mode)
28	RST	LCD reset control pin( low level reset)
29	RD	LCD read control pin
30	WR	LCD write control pin
31	RS	LCD register / data selection control pin(high level: register, low level: data)
32	CS	LCD reset control pin( low level enable)

ESP32 development board in line interface pin description

Number	Pin name	Description
1	5V	power pin (connected to 5V)
2	LCD_RS	LCD register / data selection control pin(high level: register, low level: data)
3	LCD_RD	LCD read control pin
4	LCD_D1	Pin 2 of 8-bit parallel data bus
5	GND	Power ground pin
6	LCD_WR	LCD write control pin
7	LCD_D0	Pin 1 of 8-bit parallel data bus
8	LCD_D5	Pin 6 of 8-bit parallel data bus
9	LCD_D7	Pin 8 of 8-bit parallel data bus
10	LCD_D4	Pin 5 of 8-bit parallel data bus
11	LCD_D6	Pin 7 of 8-bit parallel data bus
12	LCD_D2	Pin 3 of 8-bit parallel data bus
13	TP_CLK	IIC bus clock control pin of capacitive touch screen(SPI bus clock control pin of resistance touch screen)
14	LCD_D3	Pin 4 of 8-bit parallel data bus
15	TP_MISO	SPI bus read data pin of resistance touch screen(capacitive touch screen not used)
16	LCD_CS	LCD chip select control pin
17	GND	Power ground pin
18	LCD_RST	LCD reset control pin
19	TP_PEN	Touch screen interrupt control pin
20	TE	Tearing Effect Signal pin(read-only)
21	TP_CS	Capacitive touch screen reset pin(resistance touch screen chip selection pin)
22	TP_MOSI	IIC bus data pin of capacitive touch screen(resistance touch screen SPI bus write data pin)
23	GND	Power ground pin

Pin description of flexible cable output interface

Number	Pin name	Description
1	VCC5	Power input pin(connect to 5V)
2	VCC5	Power input pin(connect to 5V)
3~10	R0~R7	8-bit RED data pin
11	GND	power ground pin
12~19	G0 ~ G7	8-bit GREEN data pin
20	GND	power ground pin
21~28	B0 ~ B7	8-bit GREEN data pin
29	GND	power ground pin
30	PCLK	Pixel clock control pin
31	HSYNC	Horizontal synchronous signal control pin
32	VSYNC	Vertical synchronous signal control pin
33	DE	Data enable signal control pin
34	BL	LCD backlight control pin
35	TP_CS	Capacitor touch screen reset pin (resistance touch screen chip selection pin)
36	TP_MOSI	Data pin of IIC bus of capacitance touch screen (write data pin of SPI bus of resistance touch screen)
37	TP_MISO	Resistance touch screen SPI bus read data pin (capacitance touch screen not used)
38	TP_CLK	IIC bus clock control pin of capacitive touch screen (SPI bus clock control pin of resistance touch screen)
39	TP_PEN	Touch screen interrupt control pin (low level when touch is generated)
40	RST	LCD reset control pin (effective at low level)

Product Drawing Display Moudle Size:
Adapter Board Size:
Installation Instructions How to connect the development board:
Packaging & Shipping Packaging & Shipping & Delivery
Packaging Details:
All the products are packed in right way to keep it safe.
For small sizes of products we use tray + carton,
For bigger sizes we use foam slot + carton.
we also design packages according to customers' requirements
Shipping Details:
For small quantity orders: we ship by UPS Air-Express, or DHL/FEDEX/TNT/ EMS Express service, it is safe and fast.
For large quantity orders: we ship by buyer's cargo agent in China,
we can also ship by air or sea transportation by our cargo agent.
Delivery Details:
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks

Our Advantages Our Advantage:
☆Responsibility:
We take all responsibilities for any mistakes what we do make. We will remake all wrong pieces and ship out shortly.
☆Fast response:
Quickly realize your customized ideas, and have a sample ready in short time
☆Free Design:
We offer free design service depending on your ideas, logos, colors, etc.
Good knowledge of the displays market to put together solutions that add value and provide a unique proposition for the client
☆Efficient Communication:
Our sales are all with high English language skills, they are working so hard and efficient.
☆High Quality:
All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008, ISO 14001:2004 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
☆Quick Delivery (Production Time):
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks
Product Line:
☆ Clean Room class 10k@0.8um, Pressurec 0.8kgf
☆ Antistatic floor, resistance : 1x10 ohm to 1x10 ohm
☆ COG production lines: 4 .
☆ Backlight production lines: 2 .
☆ Existing machine capacity will be 1KK per month.
Quality Policy:
All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
Certification:

FAQ FAQ:
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008, ISO 14001:2004 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment0*480 CapacitouScreenCDsplay
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.

---

>> Agricultural Machine 2100A Self-Propelled Green Feed Corn Combine Harvester
>> new design wholesale brass cartridge triangle valve wash basin angle valve for toilet
>> Mini invisible hearing aids amplifiers for the elderly
>> 37m 38m HOWO Chassis Pump Truck Concrete Boom Pump Truck Exported to Africa, The Middle East, Central and South America
>> Clasp Padlock Car Logistics GPS Real Time Container Tracking Remote Control
>> Automatic Poultry Farming Equipment Chicken Broiler Ground Raising
>> Vibrant LED Underwater Pool Lights for Wholesale Distribution
>> Corn Starch 100% Biodegradable Garbage Compostable Wasste Bags for Kitchen
>> Stuffed Plush Chicken Leg Toy for Dog or Cat Chewing Pet Toy
>> 2024 New Products Leggings Deep V Bikinis One-Piece Swimwear for Sandbeach
>> CNC Hydraulic Press Brake Model 6530 Servo Plate Bending Machine
>> Universal Milling Machine Horizontal Lifting Table Milling Machine
>> Gtco Plywood Pressing Cold Press Machine Plywood Factory Machine with CE ISO for Woodworking Line
>> Hot sale agricultural Equipment Harvester Machine Price Wheat Cutting and Binding Machine
>> 2025 Top Selling China Suppliers Aplh2532 CNC High Speed Angle Drilling Marking Shearing Machine Angle Drill Line
>> Small Radial Drilling Machine Z3032X7 Z3032X7p High Quality China Radial Arm Drilling Machine
>> Pet Bottle Washing Line/Waste Plastic Recycling Machine
>> Judo Wrestling Floor Mats, Tatami Judo Mats, 12X12X0.05m
>> Inflatable Fender Bumper Docking Buoy Marine Bumper Mooring Boat Fenders Buoy
>> Custom Mens Logo Plain Blank School Business Working Unisex Golf Polo Shirts