US$5.00-12.00 | 10 Pieces (MOQ) |
Failure | Possible Reasons | Solution |
No action | Input voltage does not meet the requirements. | Replace the power supply. |
Poor contact or wrong wiring. | Check wires and terminals. | |
Abnormal action | The sensor housing is covered by dirt. | Clean the surface. |
Sudden changes in the environment in the detection area. | Check installation and site environment. | |
Unexplained action (repeated) | There are moving objects in the detection area. | Remove the object. |
There are water drops on the mask. | Remove water droplets. | |
The installation surface shakes a lot. | Re-fix the mounting surface. | |
The detection area overlaps the door body. | Adjust the sensor angle to keep it away from the door. |