Foundry Cast Iron Green Sand Muller Mixer Mixing Equipment

Product Description

Title goes here.
THE MOST IMPORTANT PROCEDURAL STEPS ARE EXPLAINED BELOW:
1. Source material for the pattern
This part is very important for lost foam casting casting. We should choose the different material according to the casting material. When we produce the aluminum die castings, we will choose the expandable polystyrene which contain pentane as blowing agent. But for the production of cast iron and steel parts a copolymer made of EPS and EPMMA is used. 2. Pr-expansion
Due to the incorporation of pentane which act as a blowing agent, polystyrene is expandable. The following is a bead pr-expanded with a fluidity bed dryer.
3. Molding
For the actual pattern section production, the pr-expansion EPS beads are blown through a fill gun into a metallic permanent mold by using compressed air. In the mold the beads are bonded after heating and the desired pattern geometry is formed. Please check the molding making process below.
4. Pattern section assemble and mounting of the patterns on a gating system
Due to the segmentation of the complex pattern pattern geometries into simple, these sections have to be assembled to one complete pattern after the foaming and drying processes. After that, the several patterns are mounted on one gating system to be the cluster.
5. Coating of the clusters
By dipping, the mounted clusters are coated with a water-based refractory coating. The coating is about 2mm thick.
6. Mold filling The coated cluster is then posited in a flask, the quartz sand is filled by sand raining feeder and compacted by the vibration table. At the end of compaction the cluster is completely embed in the quartz sand and only the sprue remains uncovered.
7. Casting
A down sprue is placed over the EPS sprue. The molten metal is poured into this downsprue and then flows to the gating system of the foam pattern. The molten metal docomposes the EPS cluster and fills into the mold cavity in all its details. Please check the decomposition process below.
8. Demolding
After the solidification of the molten metal , the castings is formed. we will convey the castings to the next shot step for further cleaning.
9. Sand processing department
After demolding, we need to convey the used sand to processing system to return sand for recycling.. Product Parameters

---

>> 2012 Best Sales Car Fog Lamp 81210-12230 For Pruis
>> China Supplier Hot Sale renlang high power 808nm fiber coupled laser diode hair removal machine for sale
>> Csz Exhaust for BMW G42 M240I/G20 M340I/G22 M440I B58 3.0t SS304 Muffler Valved Catback Sport Exhaust System
>> Z3050X11 Factory direct sale mechanical radial drilling machine
>> Anti-Dust Waterproof Anti-Wrinkle PVC Coated Tarpaulin for Truck Side Curtain
>> Modern Nordic Standing Decorative Living Room RGB LED stand Tripod Corner Floor Lamp with APP Remote Control
>> 2024 New Electric Vehicle 60V Electric Scooter 50km/H Ebike
>> Professional factory automatic vertical weighing packaging machine large bag potato chips packaging machine color touch screen
>> MAICTOP new model good quality headlight for prado 150 2005-2010 fj150 head lamp two lens
>> 2.5m/3.20m/3.66m Film Projection Screen Projection Screens 16: 9 Projection Fabric
>> Animal Feed Pellet Mill
>> Wholesale 10W 2A USB Adapter Dual 2 Port Universal Mobile Phone USB Qc3.0 Car Charger for iPhone
>> September Purchasing Festival Offers Plastic Membrane Housing Made In China 4-inch membranes shell
>> Automatic Aluminum Swimming Pool Retractable Roof with Led Strip Light
>> Coating Blue Nanocrystalline Magnetic Ring for Choke
>> Ec210 Tooth Adapter 40mm
>> V Type High Efficient Small V Shape Blender Machine
>> rebar locator wall metal detector concrete reinforcement corrosion detector
>> Cat Eye Reflective Road Stud, Aluminum Road Stud Reflectors Kt304
>> Concrete Mixer Use in Concrete Batching Plant