Gzs-26-160 Foundry Sand Casting Mixing Equipment/Efficient Rotor Sand Mixer

Product Description

Title goes here.
THE MOST IMPORTANT PROCEDURAL STEPS ARE EXPLAINED BELOW:
1. Source material for the pattern
This part is very important for lost foam casting casting. We should choose the different material according to the casting material. When we produce the aluminum die castings, we will choose the expandable polystyrene which contain pentane as blowing agent. But for the production of cast iron and steel parts a copolymer made of EPS and EPMMA is used. 2. Pr-expansion
Due to the incorporation of pentane which act as a blowing agent, polystyrene is expandable. The following is a bead pr-expanded with a fluidity bed dryer.
3. Molding
For the actual pattern section production, the pr-expansion EPS beads are blown through a fill gun into a metallic permanent mold by using compressed air. In the mold the beads are bonded after heating and the desired pattern geometry is formed. Please check the molding making process below.
4. Pattern section assemble and mounting of the patterns on a gating system
Due to the segmentation of the complex pattern pattern geometries into simple, these sections have to be assembled to one complete pattern after the foaming and drying processes. After that, the several patterns are mounted on one gating system to be the cluster.
5. Coating of the clusters
By dipping, the mounted clusters are coated with a water-based refractory coating. The coating is about 2mm thick.
6. Mold filling The coated cluster is then posited in a flask, the quartz sand is filled by sand raining feeder and compacted by the vibration table. At the end of compaction the cluster is completely embed in the quartz sand and only the sprue remains uncovered.
7. Casting
A down sprue is placed over the EPS sprue. The molten metal is poured into this downsprue and then flows to the gating system of the foam pattern. The molten metal docomposes the EPS cluster and fills into the mold cavity in all its details. Please check the decomposition process below.
8. Demolding
After the solidification of the molten metal , the castings is formed. we will convey the castings to the next shot step for further cleaning.
9. Sand processing department
After demolding, we need to convey the used sand to processing system to return sand for recycling.. Product Parameters

---

>> Durable elegant appearance chain link curtain for decorative
>> Honey Ginger Tea Instant Powder Drink
>> Custom Waterproof Canvas Premium Beach Insulation Cooler Lunch Bag
>> Taijia UTG21-PY Non-Contact Loop Powered Ultrasonic Level Transmitter Ultrasonic Tank Level Monitor Ultrasonic Level Detector
>> Waist Trimmer Wrap, Sweat Sauna Slim Belly Belt for Men & Women-Abdominal Waist Trainer
>> 3 in 1 Advanced Small in Size Laser Welding Cutting Clean Machine
>> 24color DIY Modeling Clay Play Dough Super Light Clay
>> Label Printing Offset Printing CTP Machine
>> Plastic Material Cheap Price Indoor Pet House Cage Kennel Fence with Gate for Dog Cat
>> 5V Upgrade Electric Heating Kneepad USB Interface, Protect Knee Joints, 20*26cm
>> Factory Direct Sale 8 Channel 400W Backpack Anti-Drone Fpv Device Frequency Optional 300-6GHz Signal Jammer Blocking System GaN Power Amplifier Module
>> Eco Friendly High Quality For Kitchen Rectangle Natural Bamboo Cutting Board Set
>> The Reliable Steel-Reinforced High-Density Polyethylene (HDPE) Composite Pipe.
>> Agricultural Machinery Price Working Width 3000mm 3.0m 50-60HP Tractor Fertilizer Multifunctional Cultivator
>> PU Foam Reinforced FRP Sandwich 3D Wall Panel for Truck Body/Refrigerator/Cold Room
>> sales promotion vegetable cutting machine/potato cutting machine
>> High Precision Automatic Dszg-12 (T) CNC Drilling and Tapping Machine
>> 1167 high quality precipitated barium sulphate powder Barium sulphate
>> PVC/WPC Window&Door*Ceiling/Wall Panel Wall Frame Profile Extruder Line
>> Hydraulic Plane Leather Cutting Machine/ Cutting Press/Shoe Making Machine