| Item | Unit | CFW61100D | CFW61100Q |
| Max.swing over bed | mm | 1000 |
| Max.swing over tool-post | mm | 800 |
| Max.length of workpiece | mm | 1500/2000/3000/4000/5000/6000/8000 |
| Max.Turning length | mm | 1350/1850/2850/3850/4850/5850/7850 |
| Span of guide-way | mm | 600 |
| Main spindle bore | mm | 140 | 104 |
| Spindle taper hole | | 1:20/150 | 1:20/120 |
| Spindle nose | | | C11 |
| Range of spindle speeds | r/min | 5.4~720 |
| No.of spindle speeds | | 18 |
| No.of longitudinal&cross feeds | | 64 each |
| Range of longitudinal feed 1:1 | mm/r | 0.1~1.52 |
| Range of longitudinal feed 16:1 | Mm/r | 1.6~24.3 |
| Cross-to-longitudinal feed rate | | 1/2 |
| Pitch of lead screw | mm | 12 |
| No.of metric thread | Kinds | 50 |
| Range of metric thread | Mm | 1-240 |
| No.of inch thread | Kinds | 26 |
| Range of inch thread | T.p.i | 14-1 |
| No.of inch thread | Kinds | 53 |
| Range of inch thread | mm | 0.5~120 |
| No.of diametral pitch thread | Kinds | 24 |
| Range of diametral pitch thread | T.p.i | 28-1 |
| Rapid speed of carriage | mm/min | 4000 |
| Max.travel of cross tool-post | mm | 550 |
| Max.travel of upper tool-post | mm | 200 |
| Section of tool shank | mm | 32*32 |
| Dia.of tailstock quill | mm | 125 |
| Travel of tailstock quill | mm | 250 |
| Taper of tailstock quill | | Morse NO.6 |
| Main motor power | KW | 11 |
| Rapid travel motor | KW | 1.1 |
| Model | Length of bed(mm) | Overall dimension(L*W*H)mm | Machine weight(Kg) |
| 1500 | 3600*1625*1600 | 5500 |
| 2000 | 4165*1625*1600 | 5900 |
| 3000 | 5290*1625*1600 | 6100 |
| 4000 | 6415*1625*1600 | 6800 |
| 5000 | 7510*1625*1600 | 7500 |
| 6000 | 8635*1625*1600 | 8200 |
| 8000 | 10500*1625*1600 | 9600 |
| Net weight | Kg | 3000 |
