Fully Automatic CE Standard Long Service Life New Style High-Speed Injection Molding Machine for Thin Wall Product Hxh380

Product Description

HXH High-speed Series Plastic Injection Moilding Machine
Larger space between tie-bar
The stress distribution of each part of the machine during operation is analyzed by software, the design of the clamping part is optimized according to the high-speed molding requirements for thin-walled products. The HXH series has a larger mold volume compared with the same models from different manufacturers.
Lower energy consumption
All configuration (power system, heating system, cooling system) is optimized according to the requirements of the product molding cycle (fast) and molding characteristics (thin wall). After the test and comparison of clients, it is found that under the same mold and the same output, HXH series can save about 12%-15% energy consumption compared to other brands.
Lighter product weight
The optimized clamping unit ensures the appearance of the product and optimizes the exhaust effect of the mold by using a reasonable clamping pressure. It performs injection molding at a high speed to realize the lightweight of the product
Lower lubricating cost
The unique lubricating and recyclable device realizes the reuse of lubricating oil through the recycling and filtering of lubricating oil, which saves costs for customers. The average annual saving of lubricating oil is about ¥18,000 (lubricating 1 every 300-500 shot)

MODEL: HXH380
TECHNICAL PARAMETER TABLE			A	B
INJECTION UNIT	SCREW DIAMETER	mm	55	60
	SCREW L/D RATIO	L/D	24	22
	INJECTION CAPACITY IN THEORY	cm3	582	692
	INJECTION WEIGHT(PS)	g	529	630
	INJECTION PRESSURE	MPa	171	144
	INJECTION VELOCITY	mm/s	380
	PLASTICIZING CAPACITY	g/s	80	97
	SCREW SPEED	rpm	400
CLAMPING UNIT	CLAMPING FORCE	KN	3800
	MOVING MOULD-PLATE STROKE	mm	630
	MAX. MOULD HEIGHT	mm	650
	MIN. MOULD HEIGHT	mm	250
	SPACE BWTWEEN TIE-BARS (W*H)	mm	710*660
	HYDRAULIC EJECTOR FORCE	KN	125
	HYDRAULIC EJECTOR STROKE	mm	180
	EJECTOR NUMBER	n	13
OTHERS	PUMP PRESSURE	MPa	19
	MOTOR/DRIVING POWER	KW	45+45
	HEATING CAPACITY	KW	20.3
	MACHINE DIMENSION (L*W*H)	m	6.98*1.81*2.04
	MACHINE WEIGHT	t	14
	OIL TANK CAPACITY	L	800

---

>> Hydraulic Bottle Jack 2t Car-Lift Auto Repair Tool Auto Parts Best Price
>> car parts grill accessories pickup truck grill fit for 4x4 toyota tacoma
>> AC/DC Power Plug Making Vertical Injection Molding Machine
>> 2024 Best Price Vm-1370 CNC Machining Center
>> Custom Steel CNC Eccentric Shaft Bar Couplings Joint Propeller Drive Horizontal Shaft
>> Noninvasive Water Mesotherapy Wrinkle Removal Skin Tightening Machine
>> Waste Gear Oil Recycling Equipment Machine for Converting Waste Oil Sludge Into Hydraulic Oil Reduce Environmental Pollution
>> China Top Brand Original Used Sy215 Sy215c Hydraulic Engineering-Construction-Machinery Sy235 Sy245 Sy95 Sy75 Sy60 Mining Digger Large Excavator
>> Rectangle Sun Shade Sail UV Block Canopy for Patio Backyard Lawn Garden Outdoor Activities
>> 100kg Output SS304 Blending Paddle Plastic Grain/Granule/Pellet Masterbatch Color Mixer/Mixing Machine
>> Direct Black 22 Black GF 150% CAS: 6473-13-8 Textile Dye Direct Dyestuff
>> GPS Car Active High Gain Antenna GPS External Antenna
>> Quality Hbe430 Gasoline Portable Air Vacuum Fire Extinguishing Dust Snow Leaves Blower
>> Factory Hot Selling Reusable BBQ Accessories BBQ Grill Mesh Sheet
>> Industrial Microwave Dryer Flying Maggot Microwave Dehydrator Microwave Tunnel Dryer Black Soldier Fly Larva Microwave Drying Machine
>> CE 3-10t/H Poultry Feed Pellet Machine Chicken Cattle Animal Feed Pellet Machine
>> Heat Sealing and Hot Cutting PE Slider Zipper Lock Plastic Bag Making Machines
>> CE automatic detergent washing powder bottle filling machine supplier
>> SGS CE 600kg Stone Marble Tile Vacuum Cup Glass Suction Lifter
>> Nalgene 32 Oz Wide Mouth Water Bottler Carrier Holder Sleeves with Handle