Based on the four-axis vertical deep-hole drill, this machine is equipped with high-performance intelligent tool library and telescopic guide sleeve base through scientific and technological innovation. It can perfectly realize the functions of automatic gun drill and guide sleeve, greatly improving the processing efficiency and saving invalid time. Intelligent tool library can be loaded with gun drill, milling cutter, twist drill, U drill, tapping, guide sleeve and other tool accessories, which provides powerful support for diversified processing. It can switch freely in drilling, milling and tapping processes. It is suitable for the processing of various complex parts, such as automotive parts, medical equipment, die manufacturing, etc. The field has been widely used.
| ITEM | UNIT | U8-5Axis |
| Machining capacity | | |
| Drill hole inner diameter | mm | Φ1.5~Φ25 |
| Max. drilling depth | mm | 350 |
| Machining stroke | | |
| X-axis displacement | mm | 1200 |
| Y-axis displacement | mm | 700 |
| Z-axis / Z2-axis displacement | mm | 480/480 |
| Workbench | | |
| Size (L × W) | mm | 1400*700 |
| Table size | mm | Φ800 |
| Dimensions of the center positioning hole | mm | Φ220H7 |
| Total rotation ratio | | 1:180 |
| Gear ratio of rotating worm pair | | 1:180 |
| Tilting total gear ratio | | 1:180 |
| Maximum operating oil pressure | MPa | 1.5 |
| Indexing accuracy of rotary shaft | | 15″ |
| Rotational shaft repetition accuracy | | 5″ |
| Indexing accuracy of tilting shaft | | 60″ |
| Repeatable accuracy of tilting shaft | | 8″ |
| Maximum speed of table | r/min | 11.1 |
| Set the minimum division unit | | 0.001 |
| Table tilt range | | -110°~110° |
| Table level bearing | kg | 900 |
| Table tilt bearing | kg | 600 |
| Speed and Main Spindle | | |
| Spindle taper hole | | BT50 |
| Max. spindle speed | rpm/min | 12000 |
| Feed rate | mm/min | 1~300 |
| Syslem | | |
| Control system | / | SYNTEC/FANUC |
| Tool magazine | | |
| Tool magazine | / | BT50 Disc tool library /16 bit automatic tool change |
| Guide sleeve | / | BT50 disc cutter Library / 8-bit automatic guide sleeve |
| Power | | |
| Spindle motor power | KW | 7.5/11 |
| X-axis servo motor power | KW | 3.9 |
| Y-axis servo motor power | KW | 5.9 |
| Z-axis / Z2-axis servo motor power | KW | 5.9/5.9 |
| Total power | KW | 42 |
| Cooling System | | |
| Cooling tank capacity | L | 200 |
| Cutting oil cooling pressure | kg/cm² | 0-150 |
| Cutting oil flow range | L/min | 6-60 |
| Chip conveyer system | | |
| Chip conveyor | / | Standard: Magnetic chip removal machine/Optional: chain plate or spring type |
| Size & Weigh | | |
| Machine weight | kg | 11000 |
| Machine size (L × W×H) | mm | 4500*3500*4500mm |
