US$2.10-3.00
|
1,000 kg
(MOQ)
|
Basic Info.
Application
Building Materials
Classification
Poly Addition
Main Agent Composition
Resin
Characteristic
High Adhesion Strength
Promoter Composition
Hardener
Curing Mechanism
Poly Addition
Density of Resin
1.50±0.05 G/Cm^3
Density of Hardener
1.2±0.05 G/ Cm^3
V Iscosity (After Mixing)
8000-10000 MPa.S
Mixing Ratio (by Weight)
5:1
Pot Life (23ºC)
50-80 Min
Open Time (23ºC, 50%Rh)
80-120 Min
Hardness Shore D
Approx 80
Shear Strength
≥10 MPa (Aluminum Alloy)
Flat Tension Strength
≥ 1.0 MPa
Transport Package
25kg+5kg Barrel
Specification
ISO9001, ISO14001
Production Capacity
30000 Tons/Year
Product Description
Description
Flexibond 8213/Flexibond 8200 is a two-component polyurethane adhesive which is applied for structural bonding for various substrates, such as aluminum honeycomb, wood, PU foam, polystyrene foam board, glass fiber-reinforced plastic, aluminum plate and steel plate, etc.
Characteristics
(1) Excellent adhesion to various substrates.
(2) Cures fast, shortens heat or cold setting time.
(3) Solvent free, environmental friendly.
(4) Good humidity and heat resistance.
Detailed Image
Technical Data Sheet of Flexibond 8213
| Flexibond 8213 (Resin) | Flexibond 8200 (Hardener) |
Curing mechanism | Poly addition |
Chemical base | Multiplehydroxyl compound | PAPI |
Color | White | Brown |
The coloraftermixing | Light yellow |
Density (beforecuring) | 1.50±0.05 g/cm3 | 1.2±0.05 g/cm3 |
Viscosity | 25000-30000mpa | 250mpa.s |
Viscosity (aftermixing) | 8000-10000mpa.s |
Mixingratio (by weight) | 5 | 1 |
Pot life | 50-80mins |
Open time (50%RH) | 80-120mins |
HardnessshoreD(GB/T 531-2008) | Approx 80 |
Shear strength (GB/T 7124-2008) | ≥10 Mpa (Aluminum alloy) |
Flat tension strength (GB/T 1452-2005) | ≥1 Mpa |
Shelflife (unopened below 25) | 12months | 6months |
Application
(1) Adhesive Coating:
The recommended dosage is 200-400 g/m2. The dosage varies with the roughness of the substrate surface.
(2) Mixing Ratio
Flexibond 8213/Flexibond 8200=5: 1 (by weight)
The resin (8213) should be uniformly stirred before it is mixed with the hardener (8200). Mix the two components uniformly. Mix for 1-2 more minutes after the two components color is well mixed.
(3) Adhesive Coating Temperature:
The adhesion should be taken within its open time. The open time and curing speed will be affected if the temperature is too high or too low.
(4) Pressing:
Raise the pressing pressure as high as possible without affecting the material forming.
(5) Pressing time
The pressing time is 6-8 hours. The adhesive is fully cured in 7 days. The higher the temperature is, the faster the curing is. The pressing time can reach 30 mins under the temperature of 80.
(6) Clean
Recommended Cleaner: Acetone, butanone.
Packaging
Resin: 25kg/barrel
Hardener: 5kg/barrel
The packaging can be adjusted according to customer's requirement.
Note
(1) The adhesive sealant should be used up once mixed. The remaining sealant cannot be used if viscosity appears too large or its state is like jelly.
(2) Do not apply the product together with other adhesives. Please enquire to our technicians if you have such a need.
(3) The information and recommendations related to the application and end-use of COMENS' products are given in good faith based on COMENS' current knowledge and experience of the products when properly stored, handled and applied under normal conditions. This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use, due to the practical differences in materials, substrates and actual site conditions. Users are requested to check that they are in possession of the latest version of this documents and COMENS' is at their disposal to supply any additional information.
FAQ
>>
Factory Direct Supply Dried Morel Mushroom
>>
Normally Closed Solenoid Valve Good for Spring - Under Water (SLDF SERIES)
>>
Ruipuhua Chocolate Energy Wafer Bars Flow Packaging Machine Wrapping Machine
>>
2024 Armored Exterior Front Russia Turkey Doors Steel Security Entrance for Sale
>>
Taijia Crack Width Measurement in Concrete CK102 Concrete Crack Width Detector Professional concrete wall crack width gauge
>>
Long Life Single Shaft Shredder Scrap Metal Machine Supplier Steel Shredder
>>
Mklf500 CNC Vertical Internal, Cylindrical, and Surface Grinding Machine
>>
Automatic Copper Aluminum Stainless Steel Pipe Tube Metal Bar End Chamfering Machine
>>
High Quality Masking Tape for Masking Painter Tape
>>
Lady Hand Bag Genuine Cow Pebble Leather Fashion Shoulder Handbag
>>
Hot Sale Best Price CAS 304-55-2 Dmsa 99%
>>
Everun Ere12E 1100kg machinery home farm garden new smallest mini electric hydraulic pump crawler battery digger excavator for sale
>>
Yhzs35 Capacity 35m3/H Mobile Concrete Batching on Promotion Small Concrete Mixing Plant in China
>>
Best Price Acrylic 5 Seats and 1 Lounger Massage SPA Hot Tub
>>
Innovative Solutions Chemical Reactor Stainless Steel Superior Vacuum Distillation Column
>>
Factory Price Automatic Filling PET Small Scale Pure Drinking Mineral Water Bottling Machine
>>
Customers with Reasonable Prices Prefer Dsz42-1-Z02909/42 Times Magnification Auto Level
>>
Round Rotatable Vegetable Or Fruit Storage Rack / Basket Practical Trolley For Kitchen
>>
High quality BBQ charcoal briquette press
>>
High Frequency 1kVA/900W Online UPS with Deep Cycle Built-in Battery 115-300VAC Electric Power Systems External Battery Option