Product Details
Product Description
Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
| IS200DTAIH1ACC IS210DTAOH1AA |
Chapter 5 – Fault Tracing This chapter gives step-by-step diagnostics information for finding out the causes and corrections to the most common problems with the adapter. Take advantage of the group 52 diagnostic counters. If necessary, use parameter 9902 APPLIC MACRO to restore the parameter settings of the ACS 140 to their default values and then reconfigure the drive. Power LED of the adapter is illuminated, but Receive (RxD) and Transmit (TxD) LEDs are not blinking • The master device is not transmitting. • The cable is not correctly connected to connector X2/X3 (in RS485 mode) or X4 (in RS232 mode). • Operation mode (RS485 or RS232) of the adapter is not correct: Check jumper S4. Receive LED blinks but there is no response from the ACS 140 (Transmit LED is not blinking) • The master device is not using the same communication settings as the ACS 140. • The ACS 140 is using the communication settings of the control panel: Turn power off and then on again. Receive and Transmit LEDs are blinking, but the drive does not follow commands given by the master device • The drive is not in remote control mode. • The drive parametering is incorrect: Control commands are not accepted from the serial communication channel. Receive and Transmit LEDs are blinking, but the responses ACS 140 sends are not intelligible • DIP switch S1 and parameter 5202 COMM SPEED do not have the same speed setting. • Ambient noise level is too high. The ACS 100-PAN control panel is not operating and panel display blinks • Panel is not properly connected to the drive. • The drive is using different communication settings from the panel: Connect the panel and then turn power off and then on again. Group 52 is not visible on the control panel • Make full parameter set visible by selecting menu function -LG- and pressing and holding ENTER button down until display blinks.10 Motor overtemperature 11 Motor stall alarm
>>
Modern Luxury Home Decor Crystal Pomegranate Metal Craft Ornament for Home Party Decor
>>
Wholesale price Industrial Labor gloves Protective Safety Work Gloves
>>
Building Materials China Factory 600X600 Wooden Floor Tiles Cheap Price for Sale
>>
Single Person Cold Plunge Tub Ice Bath with Athlete Fitness Recovery Chiller
>>
Module spare partsABB CI541V1 3BSE014666R1
>>
Bsmj 5kvar 7.5kvar 10kvar 12kvar Power Factor Capacitor 415V 450V
>>
Factory supply Big Capacity Oil Pressing Filtering Machine /Commercial Stainless Steel Home Cold Pressed
>>
Mini Excavator for Sale Wheel Digger Excavator Backhoe Loader Machine Excavator
>>
Metal Slitting Machine
>>
Promotional Customized PP Woven Shopping Bag Color Eco Friendly Laminated PP Woven Shopping Bag
>>
Foshan High Effciency Stainless Steel Round / Square Shaped Pipe Making Machine/ Ss Tube Mill
>>
Wafer Type Flanged Ball Valve of China (PN16-PN160)
>>
Clear Rubber Bumper Pads Die Cutting Machine
>>
Portable Small Mini Lifting Equipment Mobile Wheel 0.3 0.5 Ton Gantry Crane
>>
Wet Mix Shotcrete Machine for Sale for Tunnel From Chinese Suppliers
>>
China Price Decanter Centrifuge Machine Use Olive Oil Production
>>
High-Quality 3t Push Plain Manual Trolley for Easy Material Handling
>>
Wanjia UPVC Door PVC Triple Glass Sliding Patio Door for Houses
>>
Wholesale Custom Screen Print Logo Plain Blank 100% Cotton 260g Drop Shoulder Vintage Men T Shirt for Plus Size
>>
HC-B062 Cheap Laboratory Magnetic Stirrer With Hot Plates / Magnetic hot plate
