| US$4,500.00 | 1 Piece (MOQ) |
The main parameters | Z3032× 10 | Z3032×10 (Automatic tool movement) |
| Maximum drilling diameter (mm) | 32 | 32 |
Spindle taper | 4 Mohs No. 4 | 4 Mohs No. 4 |
Spindle speed stages | 6 | 6 |
Spindle speed range | 108-1000 | 108-1000 |
| Spindle lifting speed (r/min) | 1.21 | 1.21 |
Rocker arm rotation angle | 360° | 360° |
| Maximum allowable torque of the spindle (Nm) | 200 | 200 |
| Spindle feed (3 levels) | 0.10 0.16 0.25 | |
| Maximum feed allowed for the spindle (N) | 5300 | 5300 |
| Main motor power (kw) | 1.5/2.2 | 1.5/2.2 |
| Rocker arm lifting motor (kw) | 0.55 | 0.55 |
| Machine weight (kg) | 950 | 1000 |
Note: Cooling water pump is only available for Z3032 × 10 model (motor power: 0.24kw) | ||
The main parameters | unit | Z3040 × 10 Single Column | Z3040 × 10 double column |
Maximum drilling diameter | mm | 35/40 (steel/casting) | 35/40 (steel/casting) |
| Distance from spindle centerline to column generatrix (minimum-maximum) | Mm | 300-880 | 310-900 |
| Distance from spindle end to base table (minimum - maximum) | Mm | 230-1120 | 170-1080 |
Spindle travel | mm | 200 | 280 |
Spindle taper | MT.4 | MT.4 | |
Spindle speed stages | Level | 12 | 12 |
Spindle speed range | r/min | 34-1220 | 34-1220 |
Spindle lifting speed | r/min | 1.3 | 1.3 |
Rocker arm rotation angle | ° | 360±180° | 360±180° |
Horizontal moving distance of spindle box | Mm | 580 | 600 |
Spindle feed | 3 Level 3 | 0.10 0.16 0.25 | 0.10 0.16 0.25 |
Maximum allowable resistance of the spindle | N | 6300 | 6300 |
main motor power | kw | 1.5/2.2 | 1.5/2.2 |
Lifting motor power | kw | 1.1 | 1.1 |
Machine weight | Kg | 800 | 1150 |
| Overall dimensions (length*width*height) | Mm | 1450*690*2200 | 1500*700*2200 |
The main parameters | unit | Z3040×13 Radial Drilling Machine |
Maximum drilling diameter | mm | 35/40 (steel/casting) |
| Distance from spindle centerline to column generatrix (minimum - maximum) | Mm | 320-1170 |
| Distance from spindle end to base table (minimum-maximum) | Mm | 300-1100 |
Spindle travel | mm | 200 |
Spindle taper | MT.4 | |
Spindle speed stages | Level | 12 |
Spindle speed range | r/min | 34-1220 |
Spindle lifting speed | r/min | 1.3 |
Rocker arm rotation angle | ° | 360±180° |
Horizontal moving distance of spindle box | Mm | 850 |
Spindle feed | 3 Level 3 | 0.10 0.16 0.25 |
Maximum allowable resistance of the spindle | N | 6300 |
main motor power | kw | 1.5/2.2 |
Lifting motor power | kw | 1.1 |
Machine weight | Kg | 1500 |
| Overall dimensions (length*width*height) | Mm | 1850*800*2350 |
The main parameters | unit | Z3045× 13 Radial Drilling Machine |
Maximum drilling diameter | mm | 40/45 (steel/casting) |
| Distance from spindle centerline to column generatrix (minimum - maximum) | Mm | 320-1120 |
| Distance from spindle end to base table (minimum-maximum) | Mm | 235-1100 |
Spindle travel | mm | 280 |
Spindle taper | MT.4 | |
Spindle speed stages | Level | 12 |
Spindle speed range | r/min | 22-1400 |
Spindle lifting speed | r/min | 1.3 |
Rocker arm rotation angle | ° | 360±180° |
Horizontal moving distance of spindle box | Mm | 850 |
Spindle feed | Level 3 | 0.10 0.16 0.25 |
Maximum allowable resistance of the spindle | N | 6300 |
main motor power | kw | 3 |
Lifting motor power | kw | 1.1 |
Machine weight | Kg | 1600 |
| Overall dimensions (length*width*height) | Mm | 1850*800*2350 |
The main parameters | unit | Z3050×16 Radial Drilling Machine |
Maximum drilling diameter | mm | 48/50 (steel/casting) |
| (Distance from spindle centerline to column generatrix (minimum - maximum) | Mm | 360-1600 |
| Distance from spindle end to base table (minimum-maximum) | Mm | 300-1150 |
Spindle travel | mm | 220 |
Spindle taper | MT.5 | |
Spindle speed stages | Level | 6 |
Spindle speed range | r/min | 78.135.240.350.590.1100 |
Spindle lifting speed | r/min | 1.3 |
Rocker arm rotation angle | ° | 360 |
Horizontal moving distance of spindle box | Mm | 1250 |
Spindle feed | 6 Level 6 | 0.10/0.16/0.22/0.25/0.35/0.56 |
Maximum allowable resistance of the spindle | N | 16000 |
main motor power | kw | 4 |
Lifting motor power | kw | 1.5 |
Machine weight | Kg | 2000 |
| Overall dimensions (length*width*height) | Mm | 2170*950*2450 |
The main parameters | unit | Z3063× 16/20 Radial Drilling Machine |
Maximum drilling diameter | mm | 50/63 (steel/casting) |
| Distance from spindle centerline to column generatrix (minimum - maximum) | Mm | 360-1600/1900 |
| Distance from spindle end to base table (minimum-maximum) | Mm | 300-1050/1150 |
Spindle travel | mm | 315 |
Spindle taper | MT.5 | |
Spindle speed stages | Level | 12 |
Spindle speed range | r/min | 34.47.66.90.130.180.240.340.4 70.650.930.1280 |
Spindle lifting speed | r/min | 1.3 |
Rocker arm rotation angle | ° | 360 |
Horizontal moving distance of spindle box | Mm | 1250/1650 |
Spindle feed | 6 Level 6 | 0.10/0.16/0.22/0.25/0.35/0.56 |
Maximum allowable resistance of the spindle | N | 16000 |
main motor power | kw | 4/5.5 |
Lifting motor power | kw | 1.5 |
Machine weight | Kg | 2200/2600 |
| Overall dimensions (length*width*height) | Mm | 2170*950*2450 2570*1000(2550 |
