High Quality Pure Polyurea Coating Spray Elastomer for Waterproofing Anticorrosion

Product Description

STWD900 is a 100% solid content aromatic polyurea elastomer. It has excellent waterproof anticorrosion and abrasion resistance property which has been widely applied in the industrial and commercial filed for the anticorrosion waterproof protection.
Product Parameters *Solvent free, 100% solids, safe, environmentally friendly and odor free.
*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging.
*Dense coating, seamless, with good flexibility.
*High adhesive strength, fast bonding well on steel, concrete, wood, glass fibers and other substrates.
*Excellent impact resistance, abrasion resistance
*Excellent anticorrosion and chemical resistance to acids, alkali, salts etc.
*Excellent waterproof performance
*Good shock absorbing performance
*Excellent resistance to temperature variation
*Fast cure, application site back to service quickly
*Excellent durability to reduce maintenance cost for lifelong
*Extend the service life of sprayed structure
Products information

Item	Part A	Part B
Appearance	Pale yellow liquid	Adjustable color
Specific gravity (g/m³)	1.12	1.05
Viscosity(cps)@25ºC	800	650
Solid content (%)	100	100
Mix ratio(by volume)	1	1
Gel time (second)@25ºC	4-6
Surface dry time(second)	15-40
Theoretical coverage (dft)	1.08kg/m2 film thickness:1mm

Physical properties of products

Item	Test standard	Result
Hardness (Shore A)	ASTM D-2240	92
Elongation rate(%)	ASTM D-412	460
Tensile strength(Mpa)	ASTM D-412	17
Tear strength (kN/m)	ASTM D-624	68
Impermeability(0.3Mpa/30min)	HG/T 3831-2006	impermeable
Wearable(750g/500r)/mg	HG/T 3831-2006	4.5
Adhesive strength(Mpa)concrete base	HG/T 3831-2006	3.1
Adhesive strength(Mpa) steel base	HG/T 3831-2006	11
Density(g/cm³)	GB/T 6750-2007	1.02
Cathodic disbondment [1.5v,(65±5)ºC,48h]	HG/T 3831-2006	≤15mm

Product corrosion medium

Acid resistance 10%H2SO4 or 10%HCI,30d	No rust, no bubbles, no peel off
Alkali resistance 10% NaOH, 30d	No rust, no bubbles, no peel off
Salt resistance 30g/L,30d	No rust, no bubbles, no peel off
Salt spray resistance, 2000h	No rust, no bubbles, no peel off
Oil resistance 0# die sel, crude,30d	No rust, no bubbles, no peel off
(For reference: the above data is acquired based on GB / T9274-1988 test standard. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data)

Product application environment

Environment temperature	0ºC-45ºC
Product spray heating temperature	65ºC-70°C
hose heating temperature	55ºC-65ºC
Relative humidity	≤90%
Dew point	≥3ºC

Application guide

Recommend spray machine	GRA CO H-XP3 Polyurea spray equipment
Spray gun	Fusion-air purge or mechanical purge
Static pressure	2300-2500psi
Dynamic pressure	2000-2200psi
Recommend film thickness	1000-3000μm
Recoating interval	≤6h

Application note Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product's quality will be affected. Spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of STWD polyurea speical primer please refer to STWD company's other brochure. Always apply STWD900 on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of STWD spray polyurea series.
Product curing time

Substrate temperature	Dry	Foot traffic	Solid dry
+10ºC	30s	45min	7d
+20ºC	23s	15min	6d
+30ºC	17s	5min	5d

Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf Life
* From the manufacturer date and on original package sealed condition:
Part A: 10 months
Part B: 10 months
*storage temperature:+5-35°C
Packing: Part A 210kg/drum, part B 200kg/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
STWD guarantees all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. STWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.

---

>> Tube Amplifier for Superior Audio Performance and Clarity
>> Fuja Industrial 4 Head 12 Needle Commercial Computer Embroidery Machine
>> New Manufacturer Twisted PP Rope Machine/ Plastic Rope Making Machine for Sale
>> Wholesale price custom one step medical best hcg pregnancy test
>> OEM ODM Soft Baby Dolls Stuffed Plush Toy Rag Girl Doll Mu100358 with CE En71 Gcc
>> GBQQJ-3500 Bridge Type Hydraulic up and Down Stone Cutting Machine
>> Automatic Plastic Paper Pail Cup Jar Bottle Sealing Machine From Sealer Factory
>> 4.5" Cutting Wheel for Metal Abrasive with MPa Factory Price New Tech
>> Factory Direct Support Custom Support Send Samples Electric Scooter Mobility E Scooter Electric Mobility Scooter
>> Palm Leaves Wood Chipper Machine Tree Branch Crusher Chipper Garden Tree Leaf Branch Shredder
>> 2.4~2.5GHz 2dBi NB-IoT Router WiFi 2.4G Antenna, SMA Male Rubber 850/900/1800/1900MHz Quad-band 2G GSM Antenna
>> Euro 5 Certified Drive Tiller Lawn Mower Mini Tiller Machine CE
>> DN 50mm Blue PVC Pipe for Deep Water Well Casing
>> OEM ODM Custom Soft Plush Toy Stuffed Animal Plushies Dragon
>> Lilytoys PVC Funny Inflatable Bouncy Castle Jumping for Kids
>> Custom Shaving Soap Bowl Wooden
>> Soil testing equipment plate load testing soil bearing capacity
>> Goodee 5mm Milky White Premium High Density Fire Retardant PVC Foam Board
>> Heng De Face Shield with Portable Packing
>> High Precision Dual Grade Rotary Laser Level Surveying Instrument (SRE-207)