Automatic Casting Foundry Use Green Sand Clay Sand High Efficiency Rotor Type Mixer Machine for Clay Sand Reclamation Line

Product Description

Title goes here.
THE MOST IMPORTANT PROCEDURAL STEPS ARE EXPLAINED BELOW:
1. Source material for the pattern
This part is very important for lost foam casting casting. We should choose the different material according to the casting material. When we produce the aluminum die castings, we will choose the expandable polystyrene which contain pentane as blowing agent. But for the production of cast iron and steel parts a copolymer made of EPS and EPMMA is used. 2. Pr-expansion
Due to the incorporation of pentane which act as a blowing agent, polystyrene is expandable. The following is a bead pr-expanded with a fluidity bed dryer.
3. Molding
For the actual pattern section production, the pr-expansion EPS beads are blown through a fill gun into a metallic permanent mold by using compressed air. In the mold the beads are bonded after heating and the desired pattern geometry is formed. Please check the molding making process below.
4. Pattern section assemble and mounting of the patterns on a gating system
Due to the segmentation of the complex pattern pattern geometries into simple, these sections have to be assembled to one complete pattern after the foaming and drying processes. After that, the several patterns are mounted on one gating system to be the cluster.
5. Coating of the clusters
By dipping, the mounted clusters are coated with a water-based refractory coating. The coating is about 2mm thick.
6. Mold filling The coated cluster is then posited in a flask, the quartz sand is filled by sand raining feeder and compacted by the vibration table. At the end of compaction the cluster is completely embed in the quartz sand and only the sprue remains uncovered.
7. Casting
A down sprue is placed over the EPS sprue. The molten metal is poured into this downsprue and then flows to the gating system of the foam pattern. The molten metal docomposes the EPS cluster and fills into the mold cavity in all its details. Please check the decomposition process below.
8. Demolding
After the solidification of the molten metal , the castings is formed. we will convey the castings to the next shot step for further cleaning.
9. Sand processing department
After demolding, we need to convey the used sand to processing system to return sand for recycling.. Product Parameters

---

>> Hi-Vis Jacket Thermal Parka Winter Wear 3 in 1 Outdoor Jacket
>> 3000mm Steel Plate Yankee Cylinder
>> Top Quality Cotton Heavy 3D Embroidery Sports Hat Baseball Cap
>> Tongshengjia Machinery Textile Machinery Companies Fb1268 Carding Machine China Wool Carding Machines
>> Portable Horizontal Band Sawmill Wood Saw Machine
>> Factory Direct Sales of High-Quality 2024 New Stamping Machine
>> HC-R042 Cheap price Veterinary equipment Animal stretcher with wheels /Transfer animal stretcher For Pet Rescue
>> Custom Design Motorcycle Motorbike protective fleece hoodie ce approved protectors
>> High Quality False Ceiling System Suspended Aluminum Ceiling Grid for Mall
>> Circulating Water Bath For Asphalt Penetration Testing Machine
>> Customized Colors Outdoor Waterproof and Convenient Foldable Two-Color Camping Picnic Moisture-Proof Beach Mat
>> Module spare parts 128229-01 350042M
>> Custom Black Painting 3/4′ HDG/G80 Fender Chain
>> 2400-2500 MHz Gain 5Dbi 2.4G Router Wifi Receiver Antenna External
>> Grade 4.8/8.8/10.9/12.9 DIN931/DIN933/ANSI/ASME B18.2.1/ B18.2.2/B18.22.1/B18.21.1 Stainless Stee/Carbon Steel Black/Zinc Full/Half Thread Hex Head Nut and Bolt
>> Low Noise and Durable Safety with Home Elevator Lift
>> Wholesale USB Adapter USB Travel Adapter Mobile Phone USB Charger for Samsung N7100
>> Gaofe FM430 Hot Sell 32bits Industrial Barcode Machine Qr Code 1d 2D Barcode Scanner
>> Trending 90cm Professional Table Top Black Glass Gas Stove
>> Automatic Weighing and Mixing Machine in Rubber Industry/Automatic Weighing Machine/