Carbide Rods Tungsten Cemented Carbide Rod for End Mill

Product Description

Solid Cemented Carbide Rods
Product Description
Carbide rods are mainly used for drill bits, end-milling cutters and winches. It can also be used for cutting, stamping and measuring tools. It is used in paper, packaging, printing, non-ferrous metal processing industry. In addition, it is widely used in machining high speed steel cutters, carbide milling cutters, cemented carbide cutters, NAS cutting tools, aviation cutters, cemented carbide bits, milling cutter core bits, high speed steel, taperd milling cutters, metric milling cutters, micro end milling cutters, hinge pilot, electronic tool, carbide rotary file, cemented carbide tool, etc.

Product name	Solid carbide Rods / Bar / Stick / Columns / Cylinder
OD tolerance	H5/H6
Surface fineness	Ra0.2um
Sizes	Diameter: Φ3-Φ35mm, Length: 50-330mm
Material	Tungsten Raw Materials
Physical performance	High Precision, strength, hardness, wear resistance.
Application	Carbide rods are mainly used for drill bits, end-milling cutters and winches.
Non-standard or Tolerance	Can be customized.

Detailed Photos
Product Parameters
Grades, composition and properties

Grade	ISO code	Grain size μm	Cobalt content (wt.-%)	Density g/cm³	Hardness		TRS ISO3327
					HV30	HRA	N/mm²	K PSI
YU06	K05-K10	0.4	6.0	14.75	2050	94.3	3000	437.3
YU12	K30-K40	0.4	12.0	14.05	1700	92.5	4000	583.1
YF06	K05-K10	0.5	6.0	14.90	1850	93.5	3800	553.9
YH6F	K05-K10	0.5	6.0	14.80	1900	93.8	4000	583.1
YL10.2	K20-K30	0.8	10.0	14.42	1600	91.8	4000	583.1
YC40T	P30-P40	0.8	13.0	13.60	1470	91.0	3500	510.2
YL15	P20-P30	1.0	8.5	12.8	1600	91.5	3000	437.3
YL50	K30-K40	1.3	15.0	14.00	1110	87.6	4000	583.1

Grade	Applications recommended
YU06	Suitable for machining glass fiber, wood, plastics, aluminum-magnesium alloys, etc. It is recommended for making various solid carbide tools and PCB micro drills, micro milling tools. And it is an optimal grade for PCB micro drills & micro milling tools.
YU12	Suitable for machining titanium alloys, heat-resistant alloys, stainless steel, hardened steel, grey cast iron, glass fiber reinforced plastics, etc. It is recommended for making end mills and ball nose mills of various specifications with a higher hardness and strength than YL10.2.
YF06	Suitable for machining composite materials, such as aluminum-magnesium alloys, reinforced plastics, and carbon fiber, iron-based alloys, etc. It is recommended to make drills for machining aluminum-magnesium alloys. It is also suitable for making big PCB drills of φ3.2-6.3mm, micro drills of φ0.8-3.2mm, micro milling tools and reamers, etc.
YH6F	It is developed with Nomi composite powder with comprehensive properties of more even grain size, higher strength, hardness and toughness etc. It is especially suitable for making PCB micro drills of ф0.3-0.5mm.
YL10.2	Suitable for machining common steel, cast iron, stainess steel, heat-resistant steel, nickel based alloys and titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end mills, screw taps, gun drills, etc.
YC40T	It possesses better wear resistance, high transverse rupture strength, good toughness and impact resistance. Suitable for machining stainless steel, especially for the roughing and semi-finishing operations of austenitic stainless steel. It is suitable for machining heat-resistant alloy steel at low speeds.
YL15	Suitable for making carbide tools, such as helical milling tools with high hot hardness and impact toughness. It is recommended for the roughing of common carbon steel.
YL50	Suitable for making solid dies and moulds and tools for punching operations.

Cemented carbide rods for PCB tools Unit: mm

Type	Tolerance of diameter	Tolerance of length
Φ3.25*38.5	-0/+0.05	-0.20/+0.20
Φ3.5*38.5	-0/+0.05	-0.20/+0.20
Φ4.0*38.5	-0/+0.05	-0.20/+0.20
Φ4.5*38.5	-0/+0.05	-0.20/+0.20
Φ5.0*38.5	-0/+0.05	-0.20/+0.20
Φ5.5*38.5	-0/+0.05	-0.20/+0.20
Φ6.0*38.5	-0/+0.05	-0.20/+0.20
Φ6.5*38.5	-0/+0.05	-0.20/+0.20
Φ3.25*38.7	-0/+0.05	-0.20/+0.30
Φ3.5*12.8	+0.2+0.50	-0.10/+0.10
Φ4.0*12.8	+0.2+0.50	-0.10/+0.10
Φ4.5*12.8	+0.2+0.50	-0.10/+0.10
Φ5.0*12.8	+0.2+0.40	-0.10/+0.10
Φ5.5*12.8	+0.2+0.40	-0.10/+0.10
Φ6.0*12.8	+0.2+0.40	-0.10/+0.10
Φ6.5*12.8	+0.2+0.40	-0.10/+0.10
Φ6.85*12.8	+0.2+0.40	-0.10/+0.10

Solid Cemented Carbide Rods Blanks
Specification:ΦD X L Unit: mm

Diameter		Length
D	Tolerance	L		Tolerance
0.5	+0.1/+0.2	310	330	0/+10
1.0	+0.1/+0.2	310	330	0/+10
2.0	+0.1/+0.25	310	330	0/+10
3.0	+0.1/+0.3	310	330	0/+10
4.0	+0.2/+0.5	310	330	0/+10
5.0	+0.2/+0.5	310	330	0/+10
6.0	+0.2/+0.5	310	330	0/+10
7.0	+0.2/+0.5	310	330	0/+10
8.0	+0.2/+0.5	310	330	0/+10
9.0	+0.2/+0.5	310	330	0/+10
10.0	+0.2/+0.5	310	330	0/+10
11.0	+0.2/+0.5	310	330	0/+10
12.0	+0.2/+0.6	310	330	0/+10
13.0	+0.2/+0.6	310	330	0/+10
14.0	+0.2/+0.6	310	330	0/+10
15.0	+0.2/+0.6	310	330	0/+10
16.0	+0.2/+0.6	310	330	0/+10
17.0	+0.2/+0.6	310	330	0/+10
18.0	+0.2/+0.6	310	330	0/+10
19.0	+0.2/+0.6	310	330	0/+10
20.0	+0.2/+0.6	310	330	0/+10
21.0	+0.25/+0.65	310	330	0/+10
22.0	+0.25/+0.65	310	330	0/+10
23.0	+0.25/+0.65	310	330	0/+10
24.0	+0.25/+0.65	310	330	0/+10
25.0	+0.25/+0.65	310	330	0/+10
26.0	+0.25/+0.65	310	330	0/+10
27.0	+0.25/+0.65	310	330	0/+10
28.0	+0.25/+0.65	310	330	0/+10
29.0	+0.25/+0.65	310	330	0/+10
30.0	+0.25/+0.65	310	330	0/+10
31.0	+0.25/+0.65	310	330	0/+10
32.0	+0.25/+0.65	310	330	0/+10
33.0	+0.25/+0.65	310	330	0/+10
34.0	+0.25/+0.65	310	330	0/+10
35.0	+0.25/+0.65	310	330	0/+10

Solid Cemented Carbide Ground Rods
1. L ≤ 260mm Unit: mm

Diameter	H6	H5	Inverted angle	Inverted spec.	Tolerance of length
1.0≤D≤3.0	-0.001/-0.006	-0.001/-0.004	45°	0.3	0/+1.0
3.0<D≤6.0	-0.001/-0.008	-0.001/-0.005	45°	0.4	0/+1.0
6.0<D≤10.0	-0.001/-0.009	-0.001/-0.006	45°	0.6	0/+1.0
10.0<D≤18.0	-0.001/-0.011	-0.001/-0.008	45°	0.8	0/+1.0
18.0<D≤30.0	-0.001/-0.013	-0.001/-0.009	45°	1	0/+1.0

2. 260mm < L ≤ 330mm Unit: mm

Diameter	H6	H5	Tolerance of length
1.0≤D≤3.0	-0.001/-0.006	-0.001/-0.004	0/+10
3.0<D≤6.0	-0.001/-0.008	-0.001/-0.005	0/+10
6.0<D≤10.0	-0.001/-0.009	-0.001/-0.006	0/+10
10.0<D≤18.0	-0.001/-0.011	-0.001/-0.008	0/+10
18.0<D≤30.0	-0.001/-0.013	-0.001/-0.009	0/+10
30.0<D≤40.0	-0.001/-0.016	-0.001/-0.011	0/+10

Solid Carbide Rods With Single Coolant Hole

Diameter		Diameter of cooling hole		Concentricity(≤)	Length
D	Tolerance	d	Tolerance		L	Tolerance
3.0	+0.2/+0.5	0.5	±0.1	0.20	330	0/+10
4.0	+0.2/+0.6	1.0	±0.15	0.20	330	0/+10
5.0	+0.2/+0.6	1.0	±0.15	0.20	330	0/+10
5.0	+0.2/+0.6	1.5	±0.15	0.20	330	0/+10
6.0	+0.2/+0.6	1.0	±0.15	0.20	330	0/+10
6.0	+0.2/+0.6	1.5	±0.15	0.20	330	0/+10
8.0	+0.2/+0.6	1.0	±0.15	0.20	330	0/+10
8.0	+0.2/+0.6	1.5	±0.15	0.20	330	0/+10
9.0	+0.2/+0.6	1.0	±0.15	0.25	330	0/+10
10.0	+0.3/+0.7	1.0	±0.15	0.25	330	0/+10
10.0	+0.3/+0.7	2.0	±0.2	0.25	330	0/+10
11.0	+0.3/+0.7	1.0	±0.15	0.25	330	0/+10
12.0	+0.3/+0.7	1.0	±0.15	0.25	330	0/+10
12.0	+0.3/+0.7	2.0	±0.2	0.25	330	0/+10
14.0	+0.3/+0.7	2.0	±0.2	0.25	330	0/+10
16.0	+0.3/+0.7	2.0	±0.2	0.25	330	0/+10
16.0	+0.3/+0.7	3.0	±0.25	0.25	330	0/+10
18.0	+0.4/+0.8	3.0	±0.25	0.30	330	0/+10
20.0	+0.4/+0.8	3.0	±0.25	0.30	330	0/+10
22.0	+0.4/+0.8	3.0	±0.25	0.30	330	0/+10
24.0	+0.4/+0.8	3.0	±0.25	0.30	330	0/+10
25.0	+0.4/+0.8	4.0	±0.25	0.30	330	0/+10

Solid Carbide Rods With Two Coolant Holes

Diameter		Pitch of holes		Diameter of Cooling hole		Deviation of hole	Length
D	Tolerance	Tkφ	Tolerance	d	Tolerance		L	Tolerance
4.3	0/+0.3	1.8	-0.4/0	0.8	±0.10	0.10	330	0/+10
5.3	0/+0.3	2.0	-0.4/0	0.8	±0.10	0.13	330	0/+10
6.3	0/+0.3	3.0	-0.5/0	1.0	±0.15	0.15	330	0/+10
7.3	0/+0.3	3.5	-0.5/0	1.0	±0.15	0.15	330	0/+10
8.3	0/+0.3	4.0	-0.6/0	1.0	±0.15	0.15	330	0/+10
9.3	0/+0.3	4.0	-0.6/0	1.4	±0.15	0.20	330	0/+10
10.3	0/+0.3	5.0	-0.6/0	1.4	±0.15	0.28	330	0/+10
11.3	0/+0.4	5.0	-0.6/0	1.4	±0.15	0.30	330	0/+10
12.3	0/+0.4	6.0	-0.6/0	1.75	±0.15	0.30	330	0/+10
13.3	0/+0.4	6.0	-0.6/0	1.75	±0.15	0.34	330	0/+10
14.3	0/+0.4	7.0	-0.6/0	1.75	±0.15	0.37	330	0/+10
15.3	0/+0.4	7.0	-0.6/0	2.0	±0.20	0.40	330	0/+10
16.3	0/+0.4	8.0	-0.6/0	2.0	±0.20	0.40	330	0/+10
17.3	0/+0.5	8.0	-0.6/0	2.0	±0.20	0.47	330	0/+10
18.3	0/+0.5	9.0	-0.6/0	2.0	±0.20	0.50	330	0/+10
19.3	0/+0.5	9.0	-0.6/0	2.0	±0.20	0.50	330	0/+10
20.3	0/+0.5	10.0	-0.8/0	2.5	±0.25	0.50	330	0/+10
22.4	0/+0.5	11	-0.8/0	2.5	±0.25	0.50	330	0/+10
23.4	0/+0.5	11	-0.8/0	2.5	±0.25	0.50	330	0/+10
25.4	0/+0.5	12	-0.8/0	3.0	±0.25	0.50	330	0/+10

Company Profile
Zhuzhou Rivictory New Material Co.,Ltd. is located in Zhuzhou, Hunan, which is Chinese industrial base.The main products are Tungsten carbide blanks, carbide rods, carbide rotary burrs, milling cutters, HSS drill bits, HSS bar, CNC inserts and epoxy resign insulators, all of which have passed ISO quality certification. At the same time, we have our own research and development team, which can customize products according to customer's requests.

Production Process

FAQ
1. Who are we?
Zhuzhou Rivictory New Material Co., Ltd. is located in Zhuzhou, Hunan, which is China's industrial base. The company's main products are tungsten carbide blanks, milling cutters, carbide rods,HSS drill bits, HSS bar, carbide burrs, CNC inserts and epoxy resign insulators, all of which have passed ISO quality certification. At the same time, the company has its own research and development team, which can customize products according to customer needs.
The company is committed to providing customers with the most suitable products and the best quality services and strives to promote our products to all parts of the world.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
Tungsten carbide blanks, carbide rods, carbide rotary burrs, milling cutters, HSS drill bits, HSS bar, CNC inserts and epoxy resign insulators.
4. Why should you buy from us not from other suppliers?
Our company is located in Zhuzhou city, the capital of non-ferrous metals and high-speed railway. Has a completely industrial chain,design and research team. Our high quality products and services are welcomed all over the world.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW, DDP, DDU, Express Delivery;
Accepted Payment Currency:USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY;
Accepted Payment Type: T/T, Money Gram, Credit Card, PayPal, Western Union, Cash, Escrow.

---

>> Hot Sale High Quality Cheap Electronic 9d Cinema Manufacturer
>> Plstic Drinking Coffee Cup with Kakao Friend Toys
>> Techsem SCR Thyristor Used for Requency Converter
>> high quality upgrade full LED headlamp headlight for mercedes benz G class W463 head lamp head light 2007-2017
>> High Speed Electric Drill Bit Sharpener with Tool Grinder and Motor
>> Woodworking Tool Machine Wood Cutting Sliding Table Saw
>> Cheap Price Laser Cutting Machine 3015 Lf3015e Laser Cutting Machine Metal Fiber
>> Wholesale non slip cpe shoe covers with single elastic
>> Clothing Manufacturers Custom T Shirt Mens Graphic Tee Gym Wear Plus Size T-Shirt Plain Heavyweight 100% Cotton Oversized Tshirt
>> Fly Ash Screw Conveyor Price Flexible Screw Conveyors
>> Crane Manufacturer 3.2 Tons Mini Knuckle boom Truck Mounted Crane
>> Mens Women Life Guard Shirt Shorts Work Shorts Long Sleeve Polo Shirt Long Sleeve T-Shirt Quick Dry Sunscreen Clothing
>> Customized Motorcycle Footrests CNC Aluminum Foot Peg Rest Dirt Bike Accessories Motorcycle Pedal
>> Competitive Price Used in Trucks Factory direct Deep groove ball bearings
>> Joston Dry Herbs Chili Pulverizer Henna Spice Mill Grinder Powder Grinding Machine
>> Party Wear Jacquard Pullover Holiday Customized Christmas Sweater
>> 6′x6′ Easy Installation Weather Resistant WPC Wooden Plastic Composite Fence for Outdoor
>> HD600E cheap economic second hand used Small khaki baking food Paper Bag making Machine
>> C1060 Compatible Fuser Belt Film Sleeves for Konica Minolta Bizhub C1060 C1070 C3070 C2060 C2070
>> Walking Tractor Push Corn Harvester, Maize Harvesting Machine