Product Details
Product Description
Product Description
Brand:TRICONEX
Type:3351
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts
Our main products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.
MPU GEAR RATIO dflt= 1.0 (0.05, 100) Enter the speed sensor gear ratio followed by the ENTER key. This value is the ratio of the speed sensor gear to the turbine shaft. This gear ratio is the result of dividing the speed of the speed sensor gear by the speed of the turbine shaft. FAILED SPEED LEVEL (RPM) dflt= 250 (0.5, 1000) Enter the Failed Speed Level (in rpm) followed by the ENTER key to set the speed probe input failure level. If speed drops below this level, the control will determine the speed input device is failed and issue an alarm. If all speed inputs fail, the 505E will issue a trip on loss of speed inputs. (Must be greater than or equal to 0.0204 x Overspeed Test Limit setting) USE SPEED INPUT #2? dflt= NO (Yes/No) Select YES followed by ENTER if both speed inputs are to be used. FAILED SPEED LEVEL (RPM) dflt= 250 (0.5, 1000) Enter the failed speed level (in rpm) followed by the ENTER key to set the speed probe input failure level. If speed drops below this level, the control will determine the speed input device is failed and issue an alarm. If all speed inputs fail, the 505E will issue a trip on loss of speed inputs. (Must be greater than or equal to 0.0204 x Overspeed Test Limit setting) OFF-LINE PROPORTIONAL GAIN dflt= 5.0 (0.0, 100) Enter the off-line PID proportional gain, in repeats-per-second (rps) followed by ENTER. This value is used to set speed/load control response when the Generator or Utility Tie breaker contacts are open (if the unit is a generator) or if the turbine speed is below minimum governor speed (if the unit is not a generator) or when the Select Dynamics function is used and the contact is open. This value can be changed in the Run Mode while the turbine is operating. A recommended starting value is 5 rps. OFF-LINE INTEGRAL GAIN dflt= 0.5 (0.01, 50) Enter the off-line PID integral gain percentage followed by ENTER. This value is used to set speed/load control response when the Generator or Utility Tie breaker contacts are open (if the unit is a generator) or if the turbine speed is below minimum governor speed (if the unit is not a generator) or when the Select Dynamics function is used and the contact is open. This value can be changed in the Run Mode while the turbine is operating. A recommended starting value is 0.5%. OFF-LINE DERIVATIVE RATIO dflt= 5.0 (0.01, 100) Enter the off-line PID derivative ratio followed by ENTER. This value is used to set speed/load control response when the Generator or Utility Tie breaker contacts are open (if the unit is a generator) or if the turbine speed is below minimum governor speed (if the unit is not a generator) or when the Select Dynamics function is used and the contact is open. This value can be changed in the Service Mode while the turbine is operating. A recommended starting value is 5% (see Chapter 5—PID Dynamics Settings for more information).
ON-LINE PROPORTIONAL GAIN dflt= 5.0 (0.0, 100) Enter the on-line PID proportional gain percentage followed by ENTER. This value is used to set speed/load control response when the Generator and Utility Tie breaker contacts are closed (if the unit is a generator) or if the turbine speed is above minimum governor speed (if the unit is not a generator) or when the Select Dynamics function is used and the contact is closed. This value can be changed in the Run Mode while the turbine is operating. A recommended starting value is 5%.
>>
OEM Heavy Industrial Adjustable Warehouse Storage Rack Metal Drive in Pallet Racks/Steel Drive in Racking Filo Racking
>>
Lws Decanter Centrifuge Used-Oil Solid Bowl 3 Phase Oil Water Separator Centrifuge
>>
1L 2L 3L 5L Family Garden Watering Bottle HDPE HDPE Blow Molding Machine
>>
Cailiang Wholesale Indoor Curved P1.66 P1.875 Small Pitch Pixel LED Video Display for Concert
>>
Outdoor Use High Reflectivity Solar Mirror Shee
>>
-180 -170 -175 Lubricant Material Foundry Industry Casting Molding Mould Releaser Painting Graphite
>>
22momme Silk Satin Charmeuse Skin-Friendly Plain Solid Dyed Silk Fabric for Wedding Dress
>>
Chinese Suppliers Customized Die Cast Aluminum Parts of Water Pump
>>
High Agriculture Machinery Combine Harvester for Paddy Rice Wheat Corn Maize
>>
expanded metal mesh screen for industrial application expanded metal mesh ceiling mesh
>>
Food Delivery Bag Keep Warm Insulated Backpack Thermal Waterproof 62 litre thermal bag food delivery red
>>
High Speed Chopper Horizontal Mixer Salty Flavor Powder Plough Blade Shear Mixer
>>
Virgin PTFE Film
>>
Canvas Small Makeup Bag Travel Cosmetic Pouch Portable Washing Cosmetic Bag (MFN7293)
>>
Food Grade Plastic UHMW-PE Chopping Board for Home and Hotel
>>
20kHz 2000W Ultrasonic Plastics Welding Machine Generator System Ultrasonic Generator System
>>
Convenyor Type PU Pouring Machine for Safety Shoes with 40/60/80 Station AC Control system
>>
Customizable Tc326m Double Spindle Swiss Type Automatic CNC Lathe
>>
Solar PV DIN Rail DC1000V DC1500V 10X38mm 1p 2p 32A 10ka Fuse Holder
>>
Digital Printing Vinyl Waterproof Wallpaper / Customized Non-Woven Wallpaper for Home Decoration - Panoramic Peacocks Wallpaper - Commercial and Residential
