Strong Force D32mm 34 Kg Pull Clamping Hook Magnet

Product Description

Strong Force D32mm 34 Kg Pull Clamping Hook Magnet
Neodymium clamping magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets have an M5 threaded stud on the non-magnetic face; pot magnets are also available with countersinks and counter-bored holes.

Features	Strong Force D32mm 34 Kg Pull Clamping Hook Magnet
Shape:	Round base/POT/Disc
Size:	D32xH18mmxM6 clamping magnet
Material:	Nd-Fe-B Magnet + stainless steel hook
Grade:	N42 clamping magnet
Surface:	Nickel plating
Operating temperature:	≤80ºC
Magnetizing direction:	the plane of N S poles
Vertical Pull Strength:	34 KG
Dead Weight	3.5 ounces
Slide Resistance (Kg)	6.8 kg
Fixing:	M6 threaded stud and washer
MOQ	1000 pcs clamping magnet
Leading Time	7-25working days
Sample	Yes
Certificate	ISO2000, TS16949, RoHS, CE & SGS
Payment	T/T, PayPal, Western Union

Warning
1.Because of its super strong magnetic force,draw them close to each other slowly and gently,
when connecting two magnetic hooks, hard crushing would cause damage and cracks in the magnet inside.
2.Please slide and push the magnetic hooks one by one to avoid breaking them, when you try to make the magnetic hooks apart.
Strong magnetic hooks, please take care.
3.Make sure the magnetic hooks are out of reach children and pets, it is not a TOY, and small magnets will pose a choking hazard.
4.Watch your fingers, as they are very strong magnetic hooks,
which are difficult to pull apart and fly together quickly from far away,so it is very easy to pinch fingers between attracting poles.
5.Keep the magnetic hooks far way from medical devices, electronic products,and magnetic media, as our magnetic hooks have strong magnetic fields which may affect andor disrupt the functioning of these medical devices,electronic products,and magnetic media.
6.Magnets are fragile, they can crack, chip, or shatter if allowed to slam against each other.
so make sure handle with care, eye protection glasses should be worn when handling magnets, due to launching of small magnetic pieces at high speeds if shattering occurs.
A pot magnet is a permanent magnet encased in a steel shell, which is sometimes called a pot, hence the name 'pot' magnet.
A permanent magnet emits a magnetic field without the need for any electricity
The steel shell helps the pot magnet by increasing its holding power and providing the magnet with added strength and stability.
What are the parts of a pot magnet?
MagnetA pot magnet's magnetic face is only exposed on one side of the steel pot.
The north pole of a pot magnet is in the centre of the magnet, with the south pole around the outside edge.
The configuration of the magnetic poles creates a closed circuit when the magnet is attached to a ferromagnetic material, providing a stronger hold. A closed circuit is where the magnetic field is trapped within the ferromagnetic material when it becomes attached to the magnet.
This type of magnetisation does lead to the magnetic field being strong, but not far reaching, as the lines only run parallel to the magnet. Therefore, the pot magnet can only attract ferromagnetic materials when they are very close to the magnetic face. Steel shell on a pot magnetThe steel shell is a casing for the magnet and protects it from any chipping or cracking from contact with a hard surface.
The steel pot provides strength for the magnet, which would otherwise be very brittle, and allows threaded holes and studs to be inserted.
The steel shell helps the magnetic field become up to thirty two times stronger than other magnets by concentrating it to only one magnetic face. This means it can hold large objects such as supermarket signs from a ceiling without any additional support.
Some varieties of pot magnet can also be encased in a brass or plastic shell. The brass and plastic provide the magnet with a non-ferromagnetic shell which increases the magnetic field when a pot magnet is not supplied with a spacer. This only occurs in American pot magnets, as brass or plastic shells are not currently available in this country Pot magnet spacerA spacer acts as a barrier in-between the magnet and the steel shell to avoid any demagnetising effects the steel may have on the magnet.
A spacer in a pot magnet can either be made of brass or plastic. Rubber cap and rubber coating on a pot magnetPot magnets can have a rubber coating on top of their steel shell which allows them to be used on surfaces where the user does not want the magnet to scratch, such as on a car roof.
If the pot magnet does not have a rubber coating, there is the option to buy a rubber cap which is easy to press onto the magnet and to remove.
The rubber provides the pot magnet with friction which allows the magnet to be clamped on vertical surfaces so they will not easily slide off. However, the rubber cap or rubber coating on a pot magnet creates an air gap meaning the holding capabilities of the magnet can be reduced.
All kinds of pot magnets:
There are five forms of pot magnet: bi-pole, countersunk, through hole, internal threaded, and stud.
Pot magnets are often used as magnetic bases and magnetic holders for large supermarket ceiling signs.
GME Neodymium Pot Magnets compliment our Alnico Pot Magnets by delivering large holding powers in small packages. These magnets are designed to be "Low Profile," but still incorporate a tapped hole in the back wall for mounting.
The Neodymium Pot Magnets not only have a potent attraction while in direct contact with a work piece, but they also have excellent field projection capabilities.
NEODYMIUM with higher operating Temperatures and Intrinsic Coercive Forces are available in these Pot Magnets. Samarium Cobalt and Stainless shells and shields are also manufactured. The all Stainless Pot Magnets, for both Alnico and Neodymium, are a Level I or II food grade unit.
All GME Pot Magnets are Centerless Ground after pressing to +0.001″ / -0.000″. The standard tolerance on the length is +/-0.015″. Tighter tolerances are available upon request.
Options Various Tap Styles and Tap Depths. Insulated (Brass Sleeved). Shoulders and Machined Features on shell. Protruding Pot Magnets. Metric and Custom Sizes What are pot magnets used to?

Magnetic light fittingsInternal threaded stud pot magnets can be used as part of a light fitting for a magnetic down light. The magnet is attached to the end of the light to hold it onto the metal in a ceiling.

Exhibition display signsCountersunk pot magnets can be used to attach an exhibition display sign to a stand for marketing purposes, e.g. at a trade show.

Magnetic HoldersInternal threaded pot magnets with the added hook accessory can be used to hang items such as mugs to a fridge door.

Magnetic basesDeep internal threaded pot magnets can be used as a magnetic base for gauges e.g. an articulated gauging arm. An articulated gauging arm is used to precisely position objects within metrology (the science of measurement).

Door stopsInternal threaded stud pot magnets can be used as door stops to protect the door from closing all the way to the wall by holding it open.

Tow lightsThrough hole pot magnets can be attached to the bottom of a tow light to enable the user to attach the tow light to the car to warn other road users that their car has broken down.

JigsBi-pole pot magnets can be used as jigs. A jig is a custom-made tool created to control another tool's movements. The bi-pole pot magnet is press-fitted or glued in place on the jig to help hold a non-ferromagnetic material, such as a piece of wood, onto a ferromagnetic surface whilst it is being drilled into.

---

>> Wholesale Prices Exhaust System Catalytic Converters for KIA K5 1.6t
>> F670L V9 Dual Band 5g Wireless 2.4G 5g WiFi 4ge Gpon ONU
>> School Uniform Formal Skirt Hip-Covering Skirt Plaid Pleat Skirt
>> High Quality Plate Rubber Machine for Wide Application
>> High Working Efficiency Popular Biomass Corn Silage Wheat Hay Straw Bale Crusher Machine Price
>> FT8210H PCB Board Of Electromagnetic Flow Meter Sensor Electromagnetic Flow Indicator
>> Forseparation, ofnon-ferrous metals, mineral gold & platinum refining machine
>> Fully Automatic Customized Thermoforming Mold 64 Disposable Plastic Lid Per Time Custom Plastic Mold for Production
>> Ringlock Scaffold Manufacturer in China Fast Response Customized Service and International Shipping Support
>> OEM Manufacturer Heat Pipe Pressure Solar Thermal Water Heater Mounted on Rooftop
>> 11-053479-001 Speed Nut for Brunswick Bowling Machine
>> Efb Palm Wastes Cutting Machine
>> Refined Underwater Bouncy Trampoline Stainless Steel Frame Jumping in Pool for Gym Pool
>> European Standard Europ Design CNC Slant Bed Turning Lathe
>> Heavy Duty Hsgj Multi Cutter for India
>> Latex 25 Steel Bone Waist Trainer Waist Cincher Corset Girdle Shaper
>> Double Triple Round Truck & Trailer Light Box
>> Durable National 55x80x15 27mm Shaft Face Oil Seal Gasket Q01-0146 for Trucks
>> lab calendering machine up to 180
>> Powertec 6.5HP 100-200mm Gardening Tools and Equipment Gasoline Rotary Tiller