Product Details
Product Description
Product Description
Touchless Car Wash Equipment:
Product Features:
1.Spray the car wash foam at 360 degrees.
2.Up to 12MPa high pressure water can easily remove the dirt.
3.Complete 360° rotating within 60 seconds.
4.Ultrasonic precise positioning.
5.Automatic computer control operation.
6.Unique embedded fast air drying system.
Main Function Introduction:
main function
| Instruction
|
Flush chassis and hubs system
| Equipped with the function of cleaning the chassis and wheel hub, the nozzle pressure can reach 8-9 MPa.
|
Interated chemical mixing system
| Automatically adjust the ratio of a variety of liquids, including: ordinary car washing liquid, water flooding coating wax, and no-scrub car washing liquid.
|
High pressure flushing (standard/strong)
| The water pressure of the water pump nozzle can reach 10 MPa, and the robot arms of all equipment wash the body at a constant speed and pressure. Two modes (standard/power) can be selected.
|
Water wax coating
| A macromolecular chloride is generated in the car body, which plays a role in preventing acid rain, pollution, and ultraviolet rays.
|
Built-in compressed air drying system (all-plastic fan)
| The built-in air-drying system is equipped with three 4.0 kW fans, which can effectively air-dry the whole body of the vehicle, and there is no dead angle in 360 degrees.
|
Intelligent 3D detection system
| Equipped with advanced ultrasonic sensors, smart photoelectric sensors and closed-loop controllers, it uses an accurate closed-loop detection system to detect the length of the vehicle to ensure stability, safety, and energy saving.
|
Intelligent electronic collision avoidance
| Carry out vehicle cleaning under the premise of ensuring safety, and carry out safety protection for various emergencies.
|
Parking guidance system
| Guide the vehicle to park by reminding lights to avoid danger.
|
Security alarm system
| When the equipment fails, the light and sound will prompt at the same time, and the equipment will stop running at the same time.
|
Remote control
| Through the Internet technology, the remote control of the car washing machine is truly realized, including remote start, close, reset, diagnosis, upgrade, operation, remote liquid level monitoring and other operations.
|
Standby mode
| If the device is not used for a long time, it will automatically enter the standby state, which can reduce the energy consumption of the device in the idle state by 85%.
|
Fault self-check
| When the equipment is abnormal, start the self-check and alarm procedures, identify the cause of the fault and record the fault code, which is convenient for query and maintenance.
|
leakage protection
| It is used to protect the staff who may get an electric shock in the event of a leakage fault. At the same time, it has overload and short-circuit protection functions, which can be used to protect the circuit and the motor from overload and short-circuit.
|
A free upgrade
| The program version is free to upgrade for life, so that your car washing machine will never be outdated.
|
Strengthen the front and rear washing
| The German PINFL high-pressure industrial water pump is used to ensure that the nozzle water pressure reaches 10 MPa, which can truly achieve high-pressure washing and sweep stubborn stains.
|
Separation of water and electricity
| No electrical appliances are exposed to the outside of our mainframe rack, and put the control box and wires in the storage room. This ensures safety and reduces failures.
|
Separation of water and foam
| We set up two pipelines to spray water and foam separately, the single foam tube we designed is more than 2/3 less wasteful than the ordinary car washing machine.
|
Direct drive system
| Although the new direct drive technology has increased a lot of costs, it has greatly improved the energy saving, safety and stability of the equipment.
|
Hot dip galvanized frame double anticorrosive
| The overall hot-dip galvanized frame is anti-corrosive and wear-resistant for up to 30 years, and can be simply adjusted according to the installation height.
|
Frequency conversion energy saving system
| Advanced frequency conversion technology realizes the stage adjustment of chassis flushing water pressure, body flushing water pressure, and body drying air pressure. Various pressures can be adjusted according to the adjustment of climate and temperature to achieve the maximum optimization of energy saving and cleaning effects.
|
Oil free (reducer , bearing)
| Equipped with NSK bearings originating in Japan as standard, which is oil-free and fully sealed, and is maintenance-free for life.
|
Introduction of Product Operation Steps:
Step 1 Chassis wash
Adopt Germany PinFL advanced industrial water pump, international quality, real water knife high pressure washing
Step 2 High pressure washing
High quality stainless steel 25 degree sector spray, water saving and powerful cleaning is not contradictory
Step 3 Foam
Rich bubble is evenly sprayed in every place of the body, so that the car wash effect is better and the car paint maintenance
Step 4 Wax rain
Water wax can form a layer of high molecular polymer on the surface of the car paint. If there is a layer of protective cover for the car paint, it can effectively prevent acid rain and pollution
Step 5 Air dry
The built-in all plastic fan works with 3 pcs 4.0KW. Enlarged vortex shell design, air pressure is greater, air drying effect is better
Product Features:
Main Configuration:
The Installation:
Installation Diagram:
Company Profile:
CBK Workshop:
Enterprise Certification:
Ten Core Technologies:
Technical Strength:
Policy Support:
Application:
National Patents:
Anti-shake, easy to install, non-contact new car washing machine
Soft protection car arm for solving scratched car
Automatic car washing machine
Winter antifreeze system of car washing machine
Anti-overflow and anti-collision automatic car washing arm
Anti-scratch and anti-collision system during operation of car washing machine
FAQ:
1. What's the layout dimensions required for CBKWash installation ? ( Length×width×height )
CBK108:6800mm*3650mm*3000mm
CBK208: 6800mm*3800mm*3100mm
CBK308:8000mm*3800mm*3300mm
2. What is your biggest car wash size?
Our biggest car wash size is:5600mm*2600mm*2000mm
3. How long does your car washing machine take to clean a car?
Depending on the steps set in the car wash process, it takes 3-5 minutes to wash a car
>>
Animal Protein Production Equipment for Meat and Bone Meal (MBM)
>>
Waterproof Motorized Folding Awning For Outdoor
>>
Hurricane Proof Impact customized Aluminum round fixed Window
>>
Advanced Hot Sale Inte Glass Cutting Laser Machine for High Precision Work
>>
Dextrose Anhydrous Made in China High Purity Dextrose Anhydrous
>>
Hico 4 Channel H265 Real Time Full HD 1080P Hybrid 6-in-1 DVR Recorder with 2 HDD and Alarm WiFi 3G Function
>>
Whoelsale New Winter Warm Wear-Resistance Snow Boots Children
>>
12/24V Wholesale USB Car Charger Fast Charger
>>
Whole Stem Agricultural Machine Sugar Cane Harvester for Sale
>>
Heavy Duty 1325 Tombstone Quartz Stone Marble Milling Engraving Carving CNC Router Machine
>>
Customized CNC High Precision Parts, Modules, Blocks, Fixed Base, Fastener, Fixture, Claw, V-Shaped Guide for Inclined Wedge
>>
Custom Various Sapphire Parts
>>
Heavy Duty Metal Steel Construction Industrial Building Wheel Barrow, Garden Tool Cart Trolley, Galvanized Plastic Tray Wheelbarrow Manufacturer Stable Yard
>>
Hot Sale Agricultural Machinery Disc Plough Disc Plow for Sale
>>
Valentine′s Day Gift Decoration Chiffon Latte Flowers Packaging Baked Wedding Birthday Party Latte Butterfly Bow
>>
Nordic Wholesales living room sofas leather sofa set furniture
>>
High Efficiency Capacity Feed Machine Poultry Feed Processing Machinery Poultry
>>
X (S) N-35/30A Rubber Plastic Dispersion Kneader Mixer Rubber Mixing Machine
>>
Waterjet Parts HP Seal Kit Water Jet High Pressure Pump Parts Flow 60K Backup Seal Flow 1-11467
>>
4X4 Garden patio canopy louvered motorised electric roof outdoor aluminum metal pergola
