Frosted Type-Silicone Gel-Filled Breast Implants-Lambe

Product Description

The rough surface helps the implant blend better with surrounding tissue, reducing the risk of the implant being visible or palpable under the skin. This is especially advantageous in patients with thin or minimal breast tissue.
Product structure: Silicone gel-filled breast implants are constructed of shell made by medical grade two-part addition-cure silicone elastomer and filler made by silicone gel.
Product performance: The production and inspection of silicone gel-filled breast implants is consistent with the technical requirement of medical device (technical requirement number of medical device: CFDA20153130588); the product performance complies with the requirements of YY 0647 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607), YY/T 0640 Non-active surgical implants - General requirements (ISO 14630) and the relevant laws and regulations.

Multiple profiles and sizes	High resistancy, 6.5 million times fatigue resistance test	Approved by CFDA	Strong gel cohesion, shell elongation exceed 1000%, excellent resilience

Indication: Used for augmentation, reconstruction and revision caused by hypomastia and breast defects and for sex-change surgery.

Agglomeration Technique The optimized technique can control the index of the surface pores, making the human tissues more easily to grow into the pores and being soft.	By enhancing the cohesive technique, the Snow Lamb« is more dynamic and realistic under the guarantee of the implant's intensity.	The Setreoscopic network increase the elasticity of the silicone gel and stability of the shape to keep the implant as excellent as before.

Twelve to Fifteen Layers Structure Lambe has the shell of twelve to fifteen layers structure, filling with soft cohesive silicon gel.lt has good endurance and feeling touch and also the anti-leakage techinique can effectively prevent the gel seeping.

Lambe breast implant use the raw material from Nusil and its safety has been proved by NAS.

Frosted Round

REF	Width(W)±3mm	Height(H)±3mm	Profile(P)±5mm
DHRHP160	95mm	95mm	32mm
DHRHP180	98mm	98mm	33mm
DHRHP200	101mm	101mm	36mm
DHRHP220	104mm	104mm	37mm
DHRHP240	107mm	107mm	39mm
DHRHP260	110mm	110mm	40mm
DHRHP280	112mm	112mm	41mm
DHRHP300	115mm	115mm	43mm
DHRHP320	116mm	116mm	45mm
DHRHP340	119mm	119mm	46mm
DHRHP360	122mm	122mm	47mm
DHRHP380	123mm	123mm	48mm
DHRHP400	125mm	125mm	49mm
DHRHP440	129mm	129mm	51mm
DHRHP480	133mm	133mm	53mm
DHRHP550	138mm	138mm	55mm
DHRHP600	139mm	139mm	56mm

REF	Width(W)±3mm	Height(H)±3mm	Profile(P)±5mm
DHRSHP200	93mm	93mm	46mm
DHRSHP220	96mm	96mm	47mm
DHRSHP240	98mm	98mm	49mm
DHRSHP260	101mm	101mm	50mm
DHRSHP280	103mm	103mm	52mm
DHRSHP300	106mm	106mm	53mm
DHRSHP325	108mm	108mm	54mm
DHRSHP350	111mm	111mm	55mm
DHRSHP375	114mm	114mm	56mm
DHRSHP400	116mm	116mm	57mm
DHRSHP425	118mm	118mm	59mm
DHRSHP450	121mm	121mm	61mm
DHRSHP475	123mm	123mm	62mm
DHRSHP500	126mm	126mm	63mm
DHRSHP550	128mm	128mm	67mm
DHRSHP600	129mm	129mm	71mm

1. Medical Reconstruction
·Post-mastectomy reconstruction
Restoring breast shape after unilateral or bilateral mastectomy to improve psychological well-being and quality of life.
·Congenital deformity correction
For conditions such as Poland syndrome (pectoral muscle deficiency with breast hypoplasia), congenital absence, or severe underdevelopment of the breast.
·Post-traumatic or post-infective repair
Addressing tissue loss caused by trauma, severe infections, or prior surgeries.
2. Aesthetic Augmentation
·Addressing insufficient breast volume
For congenital hypoplasia, post-lactation atrophy, or significant weight loss leading to breast flattening.
·Correcting breast asymmetry
Adjusting congenital or acquired asymmetry (e.g., due to surgery or trauma).
·Shape enhancement
Improving sagging or lax skin-related appearance issues (may require combined breast lift surgery).
3. Gender-Affirming Surgery
·Transgender women (male-to-female)
As part of gender confirmation surgery to achieve feminine breast characteristics.
4. Implant Replacement
·Managing complications
Replacing implants in cases of capsular contracture, rupture, or displacement.
·Aesthetic preference changes
Adjusting implant size or type (e.g., switching from round to teardrop-shaped implants). Guangzhou Wanhe Plastic Materials Co., Ltd. (referred to as "Wanhe"), founded in 1996, is a high-tech enterprise with a production site covering an area of 130,000 square meters and 2,500 square meters of GMP standard clean area, specializing in researching, developing and manufacturing silicone plastic medical devices. Mainly engaged in the development, production and sale of Silicone Gel-filled Breast implants, Silicone Facial Subcutaneous Implants, Tissue Expanders for Single Use, Medical Silicone Gel Sheets and Nostril Retaines.

Breast Implants - Shell Production Room	Breast Implants - Production Center	Breast Implants - Production Center

From the date on it's establishment, Wanhe has Obtained ISO9001, ISO13485 quality management system certification, has received the certification of National High-Tech Enterprise for 4 times, and has obtained theRDC/61-2000 certification of Brazil National Health Surveillance Agency(ANVISA).

---

>> Eco-Friendly Design Paper Covered Disposable Bamboo Twins Chopsticks
>> Dakiou High Speed Paper Cutting Machine for Cups and Boxs
>> Portable Hammock Outdoor Camping 1-2 People With Mosquito Net High Strength Parachute Fabric Hanging Bed Hunting Sleeping Swing
>> Electric Skateboard. E-Board for Urban Commuting Wireless Electric Longboard
>> Flower Oil Painting Hand Paint
>> HC-S607 Heart and Lung Auscultation Manikin/Intelligent cardiopulmonary examination teaching system student machine
>> Special Urea Pulverizer Fine Powder Grinder for Compound Fertilizer Plant
>> Ocbs-T216 Ocom 2D USB Global Shutter Sensor Bar Code Reader Omni-Directional Barcode Scanner
>> Semi Automatic 4 Rolls Kitchen Towel Paper Machine Production Line
>> Red and White Automotive Road Adhesive Sticker Reflective Tape
>> Experienced One Step Injection Stretch Blow Molding Machine Plastic Sports Water Bottle Making Machines
>> ISO 9001 Approved 5 Axis CNC Milling Machine with CE, ISO9001, SGS
>> Interior Bedroom PVC Wooden Door, Wood Door Price
>> TPE Yh-165: Thermoplastic Elastomer Preferred for Automotive Parts
>> Momu High Efficiency Rubber Compression Molding Machine Rubber Pad Macking Machine
>> Wholesale Soft Sole Mens Garden Clogs Slippers Slip on Shoes Ex-23s5036
>> Industrial Usage Printing Machine Rotary Die Cutting Machine Anvil Cover
>> Nikia 230 Dual SIM Unlocked Original Super Affordable Classic Bar Mobile Phone
>> CNC Lathe Price Small CNC Machine Tool Numerical Control Milling
>> Machine Injection Machine TM90 90ton Electrical Inject Mould Machine