Paper Pulp Recycling Equipment Reject Sorter Slag Separator

Product Description

Product Description
The pulp slag separator is ideal for tailings processing in waste paper pulping systems. It adopts closed operation, no slurry splashing, good treatment effect, reduced fiber loss, low slagging treatment cost, and special equipment for treating tailings of fiber separators and pressure screens. The slag separation machine is operated under normal pressure and closed, continuous slag discharge, no clogging and splashing of water, no vibration, no noise, no need for special care, fiber recovery rate of about 70%, reducing fiber loss, slag concentration is 15%-20 %.
Equipment Material:1.The base is pressed with carbon steel, welded, and lined with stainless steel2.The knife of the rotor is 304 stainless steel,Shaft heads at both ends of the rotor are 45 steel and tempered, and the dynamic balance is performed after the processing is completed.3.The cover is 304 stainless steel, the sieve plate is 304 stainless steel, and the part that contacts the pulp is stainless steel.4.The pulley is cast iron
Detailed Photos

Product Parameters
Working principle: The upper half of the slag separator is a vortex chamber, and the lower half is a semicircular screening zone. A high-rotating rotor is installed inside. The rotor is welded with axial sweeping blades and spirally arranged alternately blade.
After the pulp enters the pulp inlet, the high-speed rotor performs a comprehensive action of beating, scraping, tearing, and peeling the tailings. First, the tailings are thrown into the vortex chamber, and then scattered to the screening area to complete the separation of fibers and impurities. During the separation process, the nozzle above the rotor continuously sprays water to dilute and elute the tailings, and rinse the rotor and the sieve plate.
After repeated cyclic sorting, the separated good fibers are discharged from the pulp outlet under the sieve plate after passing through the screen holes, and the peeled plastic pieces and other impurities are washed and discharged from the slag hopper and discarded as garbage.

Type	ZSR2	ZSR3	ZSR4
Nominal Diameter :mm	280	380	480
Production capacity:t/d	10-20	20-40	40-50
Into the slurry concentration:%	1.0-3.5	1.0-3.5	1.0-3.5
Slag discharge concentration:%	15-20	15-20	15-20
Power:kw	22	37	55

Company Profile

---

>> Coffee Bar Equipment Coffee Machine Coffee Shop Equipment
>> factory directly garage door sale garage door parts with German motor
>> Bare Copper 50 Ohm RG213 Coaxial Cable
>> CCA Treated 1/2 Inch 4FT * 8FT Shop Grade Pine Construction Wood CDX Plywood
>> manufacturer 25mm plastic cigar packing tube plastic cigar holder
>> Yes Villa Family Amitime Carton Box 7~20kW heatpump heat pump
>> Big Thickness Flange Drilling Machine CNC Hydraulic Plate Drilling Machine
>> High Quality Diesel Fuel Injector Assembly 095000-8890 23670-E0460 for Hino
>> Fly Ash Cement Hollow Concrete Solid Brick Machine Price
>> Advanced Great Quality Hot Sale Modernization Durable ODM 6m Height Scissor Lift
>> High Performance Suction Centrifugal Horizontal Slurry Oil Mud Sewage Chemical Process Pump
>> CE Certification 1000L Plastic Container Extrusion IBC Blow Moulding Molding Machine Plastic Water Tank Blow Molding Machine IBC Tank Blow Molding Machine
>> 220*80*1.2mm Galvanized Steel Metal Stamping Pallet Collar Hinge for Crate Case
>> Vintage Look Good Quality Stylish Genuine Leather Shopper Bag for Women
>> Hard Plastic Crusher Plastic Granulator Shredder Machine for Larger
>> Made in China Factory EAS Anti-Theft Tag Blister Tag EAS Tag
>> Bread Machinery Bread Kneader Rolling Machine Dough Processing Commercial Dough Divider Machine
>> CE Approval Residential Heat Alarm
>> Features for Agriculture Machine Harvester 4lzt-4.0zd Rice Combine Harvester
>> 12 Cavities Round Silicone Soap Mold DIY Soap Dish Handmade Soap Maker Candle Mold